Navigation
PH10T PLUS motorised indexing probe head
The PH10T PLUS is a motorised indexing head that mounts and re-orientates the probe repeatably to any one of 720 positions at 7.5° increments- Controlled by the PHC10-3 PLUS
- All M8 thread probes can be fitted directly onto the mount of the PH10T PLUS
- Compatible with PEL (M8) extension bars up to 300 mm (11.81 in) long
- The AM1 adjustment module (fitted between the head and the shank) corrects the alignment of the PH10T PLUS to the machine
- Shank mounted
Dimensions
Specification
Repeatability of position | <0.4 μm (0.00002 in) @ 100 mm from centre of A-axis rotation |
|---|---|
Positioning | |
Step | 7.5° |
A-axis 0° to 105° | 15 positions |
B-axis -180° to +180° | 48 positions |
Total | 720 positions |
Probe mounting | |
PH10T PLUS | M8 thread, 18 mm diameter bush face |
PH10M PLUS / PH10MQ PLUS | Multiwired autojoint |
Dimensions from quill face | |
XY (all) | 62 mm |
Z (PH10T PLUS) | 102 mm |
Z (PH10M PLUS) | 117 mm |
Z (PH10MQ PLUS) | 73 mm |
Weight | |
PH10T PLUS | 595 g |
PH10M PLUS | 620 g |
PH10MQ PLUS | 730 g |
System operating temperature | +10 °C to +40 °C (+50 °F to +104 °F) |
System storage temperature | -10 °C to +70 °C (+14 °F to +158 °F) |
The PHC10-3 PLUS is powered from the ac mains supply via an IEC 320 connector.
The operating voltages of the unit are as follows:
100 Vac - 240 Vac +10%, -15% 47 Hz - 66 Hz, 30 W maximum
Environmental conditions
The following environmental conditions comply with those defined in BS EN61010 - 1:2001:
Indoor use | IP30 (no protection against liquids) |
|---|---|
Altitude | Up to 2000 m |
Operating temperature range | 0 °C to +50 °C |
Storage temperature range | -10 °C to +70 °C |
Relative humidity | 80% maximum for temperatures up to +31 °C |
Pollution degree | 2 |
Flyers and brochures
Installation and user's guides
-
Installation and user's guide: PH10 PLUS
Each of the heads in the PH10 PLUS motorised probe head range is a general purpose, versatile unit designed specifically for use on direct computer controlled (DCC) coordinate measuring machines (CMMs).
Presentations
-
Presentation: PH10 PLUS
Presentation describing Renishaw's range of PH10 heads
| Part number | |
|---|---|
| PH10M PLUS motorised indexing probe head kits For use with multiwired probes and extension bars | |
| PH10M PLUS probe head and shank kit (see below for complete part no.) | A-5863-11** |
PH10M PLUS probe head, AM1 and shank kit (see below for complete part no.) | A-5863-19** |
PH10M PLUS probe head only | A-5863-4000 |
| PH10M PLUS probe head and AM1 kit | A-5863-1060 |
| PH10MQ PLUS quill mounted, motorised indexing probe head kits For use with multiwired probes and extension bars | |
| PH10MQ PLUS probe head kit | A-5863-6000 |
| PH10T PLUS motorised indexing probe head kits For use with M8 threaded touch-trigger probes and extension bars | |
PH10T PLUS probe head and shank kit (see below for complete part no.) | A-5863-25** |
| PH10T PLUS probe head only | A-5863-5000 |
| PH10M-iQ PLUS motorised indexing probe head kits with inferred qualification For use with multiwired probes and extension bars | |
| PH10M-iQ PLUS probe head kit | A-5863-7000 |
| PH10 PLUS head controllers and hand control units |
|
| PHC10-3 PLUS RS232 head controller (includes 24 V PSU) | A-5863-0100 |
| PHC10-3 PLUS head controller with integral PI 200-3 interface (includes 24 V PSU, 4 feet, documentation CD and USB driver) | A-5863-0200 |
| PHC10-3 PLUS head controller with integral PI 200-3 interface, additonal PICS output port and PL25(T) PICS cable (includes 4 feet, documentation CD and USB driver) | A-5863-0300 |
| HCU2 hand control unit | A-5882-0010 |
| PH10 PLUS accessories | |
| AM1 adjustment module for PH10M PLUS, PH10T PLUS, PH6M and MIH | A-1026-0320 |
| AM2 adjustment module for PH10MQ PLUS | A-1036-0080 |
| PHA3 - PH10MQ PLUS to KM1 quick change adaptor | A-2238-0751 |
| 24 V PSU for PHC10-3 PLUS, PI 200-3 and PI 7-3 | P-EA02-0042 |
| 1U bracket kit | A-1018-0189 |
| 1/3 x 1U bracket | A-1018-0179 |
| PHC10-2 bracket 1U to 2U | A-1018-0173 |
| MS1 | MS2 | MS3 | MS4 | MS5 | MS6 | MS7 | MS8 | MS9 | MS10 | MS11 | MS12 | MS13 | MS14 | MS15 | MS17 | D shank | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
PH10M PLUS | |||||||||||||||||
A- | 1139 | 1135 | 1136 |
| 1137 | 1141 | 1155 | 1142 | 1140 | ||||||||
PH10M PLUS | |||||||||||||||||
A- | 1991 | ||||||||||||||||
PH10T PLUS | |||||||||||||||||
A- | 2521 | 2522 | 2524 | 2526 | 2527 | 2530 | 2531 | 2532 | 2533 |