Power supply

Powering the PI 200-3

The PI 200-3 TP200 interface is to be used with the provided PSU - (Emerson DP4024N3M AC power adaptor).  www.emerson.com This is a 24 Vdc 49 W supply and is connected to the PI 200-3 via Ø5.5 mm dc jack plug.

PI 200-3 does not require a protective earth, however an equipotential bonding point is provided on the rear panel for connection to the rest of the installation.

  • PI 200-3 interface is rated to operate at +24 Vdc 0.25 A max input current

If an internal interface is fitted with the PHC10-3, it will obtain its power internally from the PHC10-3 controller.