SFP1

SFP1

Surface finish / surface roughness measurement

Surface finish probe inspecting a blade
  • Traditionally measured with hand-held sensors or on a dedicated measuring
    machine
  • REVO-2 SFP1 probe makes surface finish inspection an integral part of your
    CMM measurement procedure
  • Surface finish analysis can form part of a single measurement report

Product tree 

Video: SFP1 part scanning and C-axis alignment

 

Video: SFP1 calibration on SFA

System benefits:

  • Surface finish probe straight and cranked styliAutomatic changing of the SFP1 probe and stylus holders is possible using the standard MRS / MRS2 rack and RCP ports - this enables surface finish measurement to be fully integrated with the standard  CMM inspection program
  • The SFP1 probe takes advantage of the infinite positioning capability of the REVO-2 head
  • Sensor calibration involves measuring the surface finish of the surface finish calibration artefact
    (SFA) that is mounted on the MRS / MRS2 rack - the calibration software adjusts parameters within
    the probe in accordance with the calibrated value for the artefact
  • The SFP1 includes a passive C-axis that enables surface finish measurements to be made at
    all required orientations around a part - the process of changing the C-axis angle is fully
    automatic, utilising the B-axis positioning of the REVO-2 head to rotate the SFP1
  • The SFCP (C-axis port) is mounted on the MRS / MRS2 rack and features spring-loaded pins to facilitate rotation of the C-axis using the REVO-2 head's B-axis motion

C-axis

The SFP1 has a C-axis that enables surface finish measurements to be made at all required orientations around a part. The process of moving the C-axis is fully automatic utilising both the REVO-2 head B-axis and SFCP. The reorientation routine is handled completely through UCCserver.

 

REVO surface finish C axis movement

Probe characteristics

  • SFP1 is a skidded probe type with a 2 μm radius diamond stylus tip - the skid is held against the surface with a controlled force of approximately 0.2 N whilst the stylus tip force is 0.001 N
  • The SFS-1 straight and SFS-2 cranked stylus holders have been designed to facilitate access to a wide range of features
  • The probe size with a straight stylus holder allows measurement within a 10 mm diameter bore to a depth of 100 mm
  • Surface measurement capability: 6.3 µm to 0.05 µm Ra
  • Output: Ra, RMS and raw data are returned from UCCserver to the metrology application client software using the I++ DME protocol - the raw data can subsequently be presented to specialist surface analysis software packages for further detailed reporting

SFP1 and SFS-# changing system

The RCP TC-2 (thermally controlled REVO-2 change port) is used for changing SFP1, whereas the RCP2 (REVO-2 change port) is configured to change SFP1 styli (SFS-1 and SFS-2).

NOTE: Please observe the orientation of the probe in the RCP TC-2.

REVO surface finish probe change system

NOTE: The stylus tool is used to keep the port lid open during calibration. It must be removed for normal operation. SFP1 styli should not be manually fitted to the RCP.

Technical specification

Dimensions

Dimensions in mm

SFP1 dimension

Flyers and brochures

  • Flyer: SFP1 surface finish probe for REVO-2

    REVO-2 is the only scanning system for CMMs that simultaneously controls the motion of three machine and two head axes whilst collecting work piece data using its range of 2D and 3D tactile probes, surface roughness measurement probe and now non-contact vision probe too.

    [900kB]

Installation and user's guides

Videos

 Part number
REVO-2 5-axis scanning system kits 
REVO-2 entry kit (includes 1 × REVO-2 head kit, 1 × RSP2 V2 probe, 1 × RSH250 kit, 1 × datum ball kit)A-5518-1095
REVO-2 S5 controller kit (including 1 × UCC S5, 1 × SPA3 amp, 1 × REVO air filer assembly, 1 × REVO 6 mm air pipe, 1 × UCC T3 connector kit, 1 × MCU5-2 joystick, 1 × PSU)A-5518-0096
REVO-2 S5 controller kit (including 1 × UCC S5, 1 × SPA3 amp, 1 × REVO air filer assembly, 1 × REVO 6 mm air pipe, 1 × UCC T3 connector kit, 1 × MCU W-2 joystick, MCU W battery pack (2 batteries), 1 × PSU)A-5518-0098
REVO RSP2 probe 
RSP2 V2 probe (probe only)A-3060-0028
RSP2 stylus holder kits 
RSH175 stylus holder kit (including 1 × RSH175, 2 × Ø6 by 10 M2 styli, 1 × stylus tools)A-3060-0024
RSH250 stylus holder kit (including 1 × RSH250, 2 × Ø6 by 10 M2 styli, 1 × stylus tools)A-3060-0021
RSH350 stylus holder kit (including 1 × RSH350, 2 × Ø6 by 10 M2 styli, 1 × stylus tools)A-3060-0022
RSH450 stylus holder kit (including 1 × RSH450, 2 × Ø6 by 10 M2 styli, 1 × stylus tools)A-3060-0026
RSH500 stylus holder kit (including 1 × RSH500, 2 × Ø6 by 10 M2 styli, 1 × stylus tools)A-3060-0023
REVO RSP3 probe kits 
REVO RSP3-1 probe kit (including 1 × RSP3-1 probe, 1 × RSH3-1 stylus holder, 1 × 20 mm extension and styli)A-3060-0331
REVO RSP3-2 probe kit (including 1 × RSP3-1 probe, 1 × RSH3-2 stylus holder, 1 × 20 mm extension and styli)A-3060-0332
REVO RSP3-3 probe kit (including 1 × RSP3-3 probe, 1 × RSH3-3 stylus holder, 1 × 20 mm extension and styli)A-3060-0333
REVO RSP3-4 probe kit (including 1 × RSP3-4 probe, 1 × RSH3-4 stylus holder, 1 × 20 mm extension and styli)A-3060-0334
RSP3 stylus holder kits 
RSH3-1 stylus holder kit (includes 1 × stylus holder, 1 × PA25-RSH3 port adapter, 1 × stylus tools)A-3061-2521
RSH3-2 stylus holder kit (includes 1 × stylus holder, 1 × PA25-RSH3 port adapter, 1 × stylus tools)A-3061-2522
RSH3-3 stylus holder kit (includes 1 × stylus holder, 1 × PA25-RSH3 port adapter, 1 × stylus tools)A-3061-2523
RSH3-4 stylus holder kit (includes 1 × stylus holder, 1 × PA25-RSH3 port adapter, 1 × stylus tools)A-3061-2524
RSP3-6 probe 
RSP3-6 probe (probe only)A-6084-0001
RSP3-6 stylus holder kits 
RSH3-6c-500 kit for cranked styli (includes 1 × stylus holder, 2 × Ø6 by 10 M2 styli, 1 × stylus tools)A-6084-0015
RSH3-6c-600 kit for cranked styli (includes 1 × stylus holder, 2 × Ø6 by 10 M2 styli, 1 × stylus tools)A-6084-0016
RSH3-6-600 kit (includes 1 × stylus holder, 2 × Ø6 by 10 M2 styli, 1 × stylus tools)A-6084-0006
RSH3-6-700 kit (includes 1 × stylus holder, 2 × Ø6 by 10 M2 styli, 1 × stylus tools)A-6084-0007
RSH3-6-800 kit (includes 1 × stylus holder, 2 × Ø6 by 10 M2 styli, 1 × stylus tools)A-6084-0008
REVO SFP1 kits 
SFP1 combi kit (includes 1 × SFP1, 1 × SFS-1, 1 × SFS-2, 1 × SFCP, 1 × SFA)A-5453-3001
SFP1 entry kit 1 (includes 1 × SFP1, 1 × SFS-1, 1 × SFCP, 1 × SFA)A-5453-3001
SFP1 entry kit 2 (includes 1 × SFP1, 1 × SFS-2, 1 × SFCP, 1 × SFA)A-5453-3002
SFP1A-5453-0035
SFS-1A-5453-0035
SFS-2A-5453-0065
SFCP (SFP1 C-axis port)A-5453-0065
SFA (surface finish probe calibration artefact)A-5453-0055
REVO-2 RVP kits 
RVP REVO-2 vision probe kitA-5378-0080
VM10 vision module kitA-5378-0082
VM11 vision module kitA-5378-0087
VPCP vision probe change port kitA-5378-0081
VMCP vision module change port kitA-5378-0083 
VA10 vision artefact kitA-5378-0085
REVO rack kits 
REVO MRS2 rack kit #1 (includes 1 × MRS2 400 mm leg kit, 1 × MRS2 400 mm rail kit, 2 × RCP2, 1 × TDA) - 400 mm of rail spaceA-3060-2631
REVO MRS2 rack kit #2 (includes 1 × MRS2 400 mm leg kit, 1 × MRS2 600 mm rail kit, 2 × RCP TC-2, 2 × RCP2, 1 × RCP TC PSU unit, 1 × TDA) - 600 mm of rail spaceA-3060-2632
REVO MRS2 rack kit #3 (includes 1 × MRS2 600 mm leg kit, 1 × MRS2 600 mm rail kit, 1 × MRS2 front spaced 600 mm rail kit, 2 × RCP TC-2, 2 × RCP2, 1 × RCP TC PSU unit, 1 × TDA) - 1200 mm of rail spaceA-3060-2633
REVO MRS2 rack kit #4 (includes 1 × MRS2 800 mm leg kit, 1 × MRS2 600 mm rail kit, 1 × MRS2 front spaced 600 mm rail kit, 1 × MRS2 back spaced 600 mm rail kit, 2 × RCP TC-2, 2 × RCP2, 1 × RCP TC PSU unit, 1 × TDA) - 1800 mm of rail spaceA-3060-2634
REVO MRS2 rack kit #5 (includes 1 × MRS2 600 mm leg kit, 1 × MRS2 1000 mm rail kit, 1 × MRS2 front spaced 1000 mm rail kit, 2 × RCP TC-2, 2 × RCP2, 1 × RCP TC PSU unit, 1 × TDA) - 2000 mm of rail spaceA-3060-2635
REVO MRS2 rack kit #6 (includes 1 × MRS2 800 mm leg kit, 1 × MRS2 1000 mm rail kit, 1 × MRS2 front spaced 1000 mm rail kit, 1 × MRS2 back spaced 1000 mm rail kit, 2 × RCP TC-2, 2 × RCP2, 1 × RCP TC PSU unit, 1 × TDA) - 3000 mm of rail spaceA-3060-2636
REVO rack ports and rack accessories 
REVO RCP2 change port for RSP2, SFP1 and RSP3-6 stylus holdersA-3060-0090
REVO RCP TC-2 thermally controlled change port for REVO probesA-3061-0310
REVO RCP TC PSU unitA-3061-0302
REVO FCR25 flexible change rack kit for changing RSH3 stylus holders: three port unit for MRS system (includes 1 × FCR25, 3 × PA25-RSH3, 1 × REVO FCR25 adaptor kit)A-3061-0105
TDA (tip datum artifact)A-3060-0085
DC link cableA-3060-0015
1.5 m dc extension cableA-3060-0016
5 m dc extension cableA-3060-0017
10 m dc extension cableA-3060-0018
REVO FCR25 adaptorA-3061-0101
REVO accessories 
REVO datum ball kit (including 45 mm datum ball in wooden box with M6, M8, M10, 5/16, 3/8 mounting studs and spanner set)A-3060-0310
REVO mechanical fuse mount (crash protection)A-3060-0300
REVO RCP door replacement kitA-3061-1962
PA25-RSH3 kit (includes 3 × PA25-RSH3 port inserts)A-3061-2530
REVO air pipe 6 mm O/D × 20 mA-3060-0082
REVO air filter setA-3060-0070
15 m cable for use with PH20 and REVOA-5669-0015
25 m cable for use with PH20 and REVOA-5759-0025
30 m cable for use with REVOA-5669-0030
REVO Y cable adaptor kitA-3060-0045