Skip navigation

SFP1 calibration

The SFP1 is calibrated using the calibration plate on the surface finish artefact (SFA). The SFA must be mounted to the MRS2 system.

Surface finish calibration artefact with labels

The following routines are handled through UCCserver for the SFA:

  • Set up and alignment of the SFA (RSP2 V2 needs to be fitted to the REVO for this step)
  • Calibration routine

The calibration routine within UCCserver randomly changes the position on the SFA that is used for calibrating the probe to minimise wear on the artefact plate.