TP2-5W legacy probe

  • TP2 touch trigger probeSmall, light, versatile probe
  • 13 mm (0.51 in) diameter standard kinematic touch-trigger probe with an M8 thread mount
  • Adjustable trigger force to support a wide range of styli
  • Compatible with M2 styli
  • Compatible with the full range of Renishaw probe heads and accessories
  • Suitable for manual and DCC CMMs

Dimensions

 TP2-5W_dimensioned_dwg 

Specification

Principal application

Universal DCC and manual CMMs

Sense directions

5-axis: ±X, ±Y, +Z

Unidirectional repeatability maximum (2σ μm) (at stylus tip)

0.35 μm (0.000014 in)

Pre-travel variation 360° (XY plane)

±0.80 μm (0.000032 in)

Weight *excluding shank and cable

22 g (0.78 oz)

Stylus range

M2

Stylus force range (adjustable)

0.07 N - 0.15 N

Stylus force (set by Renishaw)

0.07 N - 0.08 N

Stylus overtravel (typical)
XY plane +Z axis

±14°
4 mm (0.16 in) @ 0.07 N
3 mm (0.12 in) @ 0.15 N

Maximum extension on PH10 series

300 mm (11.81 in)

Mounting method

M8 thread

Suitable interface

PI 7-3, PI 200-3, UCC

Above data applies to test conditions as follows:

  • Stylus length 10 mm (0.39 in)
  • Stylus velocity 480 mm/min (1.57 ft/min)
  • Stylus force 0.07 N - 0.08 N

Installation and user's guides

  • User's guide: Touch-trigger probe systems

    TP1(S) - A robust shank-mounted probe offering generous overtravel, ideally suited to manual CMMs. TP2 5-way - A compact probe allowing component penetration, ideally suited to CNC/DCC machines. TP6 - Complementing the TP2 series, but carrying longer and heavier styli, this probe is suited to general purpose applications. TP6A - This probe has all the functions of the TP6 probe and in addition the patented Renishaw autojoint that permits fast probe exchange without the need to requalify.

    [541kB]
 

 Part number 

 TP2-5W probe and TK5 tool kit A-1042-1890