UCC - EXP (RJ45 socket)

The UCC PI 80 should be connected to the UCC S3 controller (as shown below) using the RJ45 cable (P-CA40-0040) provided in the UCC PI 80 kit. Either expansion port on the UCC S3 can be used.

Technical drawing:  Technical drawing:  UCC - EXP - RJ45 socket

If the provided RJ45 cable is not used then the cable should be no longer than 300 mm in length, CAT 5E and shielded.

Technical drawing:  Technical drawing:  UCC PI 80 to UCC S3