Skip navigation

SCR200 stylus change rack

Stylus module rack for use with TP200

  • Rapid automatic changing of stylus modules without the need to requalify stylus tips
  • Powered by PI 200-3
  • Incorporates features to facilitate safe stylus changing
  • Leg mounted or rail mounted versions available
SCR200SCR200-R

Dimensions

SCR200

SCR200 dimensions

SCR200-R

SCR200-R dimensions

NOTE: Dimensions in mm (in).

Specification


Weight

0.75 kg

Mounting orientation

Vertical or horizontal

Mounting fixture

Single stud (M8, M10)

Number of ports

6

Repeatability of stylus change (2σ) at 50 mm

Automatic ≤1 μm

Manual ≤2 μm

Entry speed

Unrestricted

Module pull-off force

800 g maximum

Overtravel protection

Electromechanical (5 minimum deflection)

LED indicators

Power

Green

Status

Red (flashing during probe inhibit)

Change cycle detection

Optoelectronic beam system with Hall effect proximity sensor

Multi-rack usage

Up to two SCR200 units (12 ports) may be connected with a special cable


Installation

All alignment requirements and port docking co-ordinates can be established with only eight probing points. No control signals from the CMM are required.


Alignment adjustment

XY rotational only ±0.1 mm

Docking tolerance

X 0.17, Y 1.5 mm, Z 2 mm

Power supply / control

PI 200-3 interface

Cable length

20 m maximum (PI 200-3 to SCR2000)

Cable connection

6-pin miniature DIN socket

Set-up time

<30 minutes



SCR200 rack for automatic stylus changing with TP200 (rack only)

A-1207-0031

SCR200 active six port change rack for use with TP200 (including 3 x standard force stylus modules)

A-1207-0030

SCR200 active six port change rack for use with TP200 (including 3 x low force stylus modules)

A-1207-0070

SCR200-R MRS rail mounted rack kit for automatic stylus changing with TP200 (includes XCR to MRS generic adaptor kit).

This is a special product.

A-1085-0948