Legacy controllers

For applications needing only a touch-trigger probing capability, UCClite / UCClite-2 is a lower specification controller configurable for use with manual or DCC CMMs.

The UCC1 can operate in touch-trigger probing mode or with full scanning capability.

UCC2 is suitable for touch-trigger and scanning probing, and is also the controller platform for 5-axis scanning technology.

Universal CMM controller suitable for touch-trigger and scanning probing

Entry level combined controller and amplifier

PHC10-2 head controller receives instructions from the CMM control and controls all head functions and reports system status to the CMM

PHC10-3 and the UCC2 PH10 daughter card. The PHC10-3 has replaced the PHC10-2 and provides support for RS232 and USB communications (IEEE is no longer supported). The PHC10-3 uses an external power supply for the PH10 series of heads, manages all the head functions and communicates via a suitable interface with the CMM's computer.

Low powered (250 W), low cost 3-axis servo power amplifier

The design of the SPA1 has been optimised to work with the UCC1 CMM controller

Digital servo power amplifier to accommodate between 3 and 7 axes.