Renishaw probing cuts manual intervention time dramatically for Equinox 3D
June 2017
As a specialist producer of fibreglass products across a wide variety of industries, Equinox 3D is often approached with intricate and bespoke designs. Thanks to the introduction of Renishaw probing systems to its manufacturing process, the company based in Faversham (UK), is able to meet the most unusual of customer requirements accurately and reliably within a short time frame.
Downloads
-
Case study: Renishaw probing cuts manual intervention time dramatically for Equinox 3D [1.4MB]
-
Equinox Case study: Header - Renishaw probing cuts manual intervention time dramatically for Equinox 3D [356kB]
-
Equinox Case study: The finished project was unveiled by supermodel and racing driver Jodie Kidd at Brooklands [283kB]
-
Equinox Case study: The Renishaw OMP40 part setting probe was used to set the datum of 16 blocks of 0.7 density PU modelling board [131kB]
-
Equinox Case study: The 16 sections had to fit together accurately to ensure that the fibreglass mould would require the minimum of hand finishing [257kB]
-
Equinox Case study: An OMP40 part setting probe and TS27R tool setting probe were used to set the 16-section mould for the monoposto cover [148kB]
For further images, videos, company biographies or information on Renishaw and its products, visit our Media Hub.