Bu sayfa şu anda sizin dilinizde mevcut değildir. Google'ın Çeviri sistemini kullanarak otomatikleştirilmiş çeviriye ulaşabilirsiniz. Bu hizmeti sağlamaktan sorumlu değiliz ve çeviri sonuçları tarafımızdan kontrol edilmemiştir.
Eğer daha fazla yardıma ihtiyaç duyarsanız lütfen bizim ile temasa geçiniz.

Calibration white papers

Browse our comprehensive library of white papers for laser calibration, laser diagonal testing and ballbar testing. Our papers provide in-depth technical knowledge and real-world applications.

Laser calibration

White paper: Calibration of machine squareness

White paper: Calibration of machine squareness

This paper describes a variety of methods for evaluating the squareness between the linear axes of motion of a machine tool, in accordance with the 2012 version of ISO230-1.
[6.4MB]
White paper: Environmental compensation of linear laser interferometer readings

White paper: Environmental compensation of linear laser interferometer readings

This paper describes the importance of environmental compensation in linear interferometry and covers both air refraction and material expansion compensation.
[1.2MB]
White paper: Interferometric angle measurement and the hardware options available from Renishaw

White paper: Interferometric angle measurement and the hardware options available from Renishaw

This paper describes the operational principles behind Renishaw's interferometric angular optics and how they can be used to measure pitch or yaw errors in a linear axis, the angular accuracy of a rotary axis, or surface flatness.
[3.6MB]
White paper: Interferometric calibration of rotary axes

White paper: Interferometric calibration of rotary axes

This paper describes the operational principles behind Renishaw's XR20 rotary axis calibration system and how it can be used 'on axis' to calibrate axes of rotation. For details of angular measurement on linear axes, refer to the relevant paper in the XL-80 support area.
[3.7MB]
White paper: Interferometric straightness measurement and application to moving table machines

White paper: Interferometric straightness measurement and application to moving table machines

This paper describes in detail the operational principles behind Renishaw's interferometric straightness optics.
[1.5MB]
White paper: The benefits of remote interferometery for linear, angular and straightness measurements

White paper: The benefits of remote interferometery for linear, angular and straightness measurements

This white paper examines each measurement mode (linear, angular and straightness) and explains the benefits of taking measurements interferometrically, with remote interferometer optics and the laser mounted on a tripod. It also draws attention to the importance of the environmental compensation system for linear measurement accuracy.
[519kB]

Laser diagonal testing

White paper: Laser diagonal measurement for machine tool performance assessment

White paper: Laser diagonal measurement for machine tool performance assessment

The introduction of B5.54 and ISO 230-6 machine tool performance measurement standards has increased the popularity of laser interferometer diagonal, step diagonal and vector methods for the evaluation and compensation of machine tool errors. This is due to the potential reduction in test times these methods can provide compared with the more conventional laser interferometer based linear, angle and straightness measurements, taken along lines parallel to the machine’s X, Y and Z axes. This paper provides an updated overview of laser diagonal measurements for machine tool performance assessment. It is based on the work in a previous Renishaw paper combined with significant updates to reflect the changes since then.
[1.4MB]
White paper: Laser diagonal testing

White paper: Laser diagonal testing

This presentation explains how Renishaw laser calibration systems can be used to check machine positioning performance along machine diagonals, in accordance with the B5.54 and ISO 230-6 standards.
[1.5MB]
White paper: Laser step diagonal testing

White paper: Laser step diagonal testing

This presentation reviews the step or vector diagonal measurement method for machine calibration.
[1.2MB]

Ballbar testing

White paper: Ballbar testing with circle, diamond, square machining tests

White paper: Ballbar testing with circle, diamond, square machining tests

This whitepaper describes how Renishaw ballbar tests can be used in tandem (or in some cases in lieu of) a 'Circle diamond square' cutting test to evaluate machine tool performance.
[993kB]

Service and support

Renishaw have earned an enviable reputation for our commitment to customer care and support. Should you need technical advice, you can easily access guides and downloads in our technical support library or contact our global support team.

Contact our sales team today

Get in contact with your local office to find out more information and speak to an expert.