 | PH10T/M/MQ-iQThe range of PH10 motorised heads are now available as a -iQ (inferred qualification) option. This means that the user performs an initial calibration and all other positions are then inferred rather than the current method of calibrating each position as required. This is possible for both bridge and horizontal arm CMM's. The -iQ heads are identical to the current PH10 range with the exception of being supplied with a unique head file that is needed during the commissioning process. This head file can be found on the CD that is supplied with the PH10 and also contains the user guide. It is not possible to use PH10-iQ with scanning probes. PH10-iQ motorised heads currently only operate with the head mounted vertically. |