Skip navigation

PH10M PLUS / PH10MQ PLUS motorised indexing probe head

PH10M PLUS shank-mounted and PH10MQ quill-mounted heads with multiwired probe capability and a Renishaw autojoint

  • PH10M PLUS and PH10MQ PLUSThe PH10M PLUS and PH10MQ PLUS are motorised indexing heads that re-orientate the probe repeatably to any one of 720 positions at 7.5° increments
  • Autojoint mount for repeatable probe positioning
  • Torque capable of lifting a 300 mm (11.81 in) long extension bar
  • Full multiwire capability for probes such as TP7M and SP25M
  • Rapid automatic probe interchange via ACR1 or ACR3
  • AM1 for PH10M PLUS and AM2 for PH10MQ PLUS adjustment modules for aligning the probe head to machine
  • PH10MQ PLUS fits inside the quill for a neater and shorter probe mount

Dimensions

PH10M PLUS dimensions


PH10MQ PLUS dimensions

NOTE: Dimensions in mm (in).

PH10M PLUS - A and B-axisPH10MQ PLUS - A and B-axis

Specification


Repeatability of position

<0.4 μm (0.00002 in) @ 100 mm from centre of A-axis rotation

Positioning


Step

7.5°

A-axis 0° to 105°

15 positions

B-axis -180° to +180°

48 positions

Total

720 positions

Probe mounting

PH10T PLUS

M8 thread, 18 mm diameter bush face

PH10M PLUS / PH10MQ PLUS

Multiwired autojoint

Dimensions from quill face

XY (all)

62 mm

Z (PH10T PLUS)

102 mm

Z (PH10M PLUS)

117 mm

Z (PH10MQ PLUS)

73 mm

Weight

PH10T PLUS

595 g

PH10M PLUS

620 g

PH10MQ PLUS

730 g

System operating temperature

+10 °C to +40 °C (+50 °F to +104 °F)

System storage temperature

-10 °C to +70 °C (+14 °F to +158 °F)


The PHC10-3 PLUS is powered from the ac mains supply via an IEC 320 connector.

The operating voltages of the unit are as follows:

100 Vac - 240 Vac +10%, -15% 47 Hz - 66 Hz, 30 W maximum

Environmental conditions

The following environmental conditions comply with those defined in BS EN61010 - 1:2001:


Indoor use

IP30 (no protection against liquids)

Altitude

Up to 2000 m

Operating temperature range

0 °C to +50 °C

Storage temperature range

-10 °C to +70 °C

Relative humidity

80% maximum for temperatures up to +31 °C

Pollution degree

2



Part number

PH10M PLUS motorised indexing probe head kits

For use with multiwired probes and extension bars

PH10M PLUS probe head and shank kit (see below for complete part no.)

A-5863-11**

PH10M PLUS probe head, AM1 and shank kit (see below for complete part no.)

A-5863-19**

PH10M PLUS probe head only

A-5863-4000

PH10M PLUS probe head and AM1 kit

A-5863-1060

PH10MQ PLUS quill mounted, motorised indexing probe head kits

For use with multiwired probes and extension bars

PH10MQ PLUS probe head kit

A-5863-6000

PH10T PLUS motorised indexing probe head kits

For use with M8 threaded touch-trigger probes and extension bars

PH10T PLUS probe head and shank kit (see below for complete part no.)

A-5863-25**

PH10T PLUS probe head only

A-5863-5000

PH10M-iQ PLUS motorised indexing probe head kits with inferred qualification

For use with multiwired probes and extension bars

PH10M-iQ PLUS probe head kit

A-5863-7000

PH10 PLUS head controllers and hand control units

PHC10-3 PLUS RS232 head controller (includes 24 V PSU)

A-5863-0100

PHC10-3 PLUS head controller with integral PI 200-3 interface (includes 24 V PSU, 4 feet, documentation CD and USB driver)

A-5863-0200

PHC10-3 PLUS head controller with integral PI 200-3 interface, additional PICS output port and PL25(T) PICS cable (includes 4 feet, documentation CD and USB driver)

A-5863-0300

HCU2 hand control unit

A-5882-0010

PH10 PLUS accessories

AM1 adjustment module for PH10M PLUS, PH10T PLUS, PH6M and MIH

A-1026-0320

AM2 adjustment module for PH10MQ PLUS

A-1036-0080

PHA3 - PH10MQ PLUS to KM1 quick change adaptor

A-2238-0751

24 V PSU for PHC10-3 PLUS, PI 200-3 and PI 7-3

P-EA02-0042

1U bracket kit

A-1018-0189

1/3 x 1U bracket

A-1018-0179

PHC10-2 bracket 1U to 2U

A-1018-0173


PH10M PLUS

A-5863-

PH10M PLUS

(with AM1)

A-5863-

PH10T PLUS

A-5863-

MS1

1139

2521

MS2

1135

2522

MS3

MS4

2524

MS5

MS6

1136

2526

MS7

2527

MS8

1137

MS9

1141

MS10

MS11

MS12

1155

2530

MS13

1142

2531

MS14

2532

MS15

1140

2533

MS17

1991

D shank