Equator™ gauge case studies
Equator gauging systems have helped hundreds of manufacturers to achieve their production goals. Take a look at these case stories to see what our customers say about the Equator gauge.
Case studies
Automotive
Tremec Mexico has reduced shop floor gauging time of Daimler parts by 85% with Equator™ gauges.
MoreAerospace
The Equator™ gauge has cut inspection times per part by around 75% and introduced more comprehensive component traceability.
MoreSince using the Equator™ gauge, High-Tech Engineering have not made a single bad part and have reduced part production cost by 27%.
MoreIn its pre-launch application, one Renishaw Equator™ gauge has eliminated at least four costly hard gauges in a new work cell.
MoreHeavy industry
Equator™ programmable gauges have helped Conroe Machine create the ultimate automation cell for bearing machining and parts sorting.
MoreMarine and offshore operations
By using Equator™ systems directly on the factory floor, ZF Marine have made it possible to avoid measuring room bottlenecks, avoid transfer times to measuring rooms and reduce part inspection times.
MoreMould and Die
On one complex moulded part Euromould have reduced the measurement cycle time from 25 minutes down to just 4 minutes using the Equator™ gauge.
More