Downloads de manuais e guias de instalação

Tecnologia de 5 eixos

• Folheto: Apalpadores REVO-2 e RSP2
  

  Folheto: Apalpadores REVO-2 e RSP2

  O REVO-2 é o único sistema de escaneamento para CMMs que comanda simultaneamente os três eixos da máquina e os dois eixos do cabeçote enquanto coleta dados da peça utilizando sua série de apalpadores por contato 2D e 3D, apalpador de medição da rugosidade da superfície e agora também o apalpador para inspeção visual sem contato.

  [355kB]
• Folheto: Apalpadores RSP3-1 a RSP3-4
  

  Folheto: Apalpadores RSP3-1 a RSP3-4

  O RSP3 é utilizado para o escaneamento em 3 eixos com um ângulos fixos do cabeçote REVO-2 durante a medição. Cada apalpador é projetado para proporcionar exatidão e força de contato otimizadas para um campo específico da ponta. Por conseguinte, os suportes de ponta RSH3 devem ser utilizados somente com o seu respectivo apalpador RSP3.

  [270kB]
• Folheto: Apalpador de alcance ampliado RSP3-6
  

  Folheto: Apalpador de alcance ampliado RSP3-6

  O RSP3-6 proporciona maior capacidade para acessar furos profundos e inspecionar características dentro de peças grandes. Ele está disponível com uma série de suportes de pontas para aplicações que requerem extensões retas e em L e pode ser utilizado em aplicações por contato e escaneamento 2D.

  [422kB]
• Folheto: Apalpador para medição por imagem
  

  Folheto: Apalpador para medição por imagem

  O RVP amplia ainda mais o leque de aplicações para o sistema REVO-2 com um sensor sem contato de detecção de borda, podendo ser intercambiado automaticamente com todos os outros tipos de sensore para o REVO. Como resultado, o sistema fornece a ferramenta ideal para medir múltiplas características e uma variedade maior de peças pode ser inspecionada.

  [508kB]
• Folheto: Apalpador de acabamento da superfície SFP2
  

  Folheto: Apalpador de acabamento da superfície SFP2

  O apalpador SFP2 aumenta a capacidade de medição de acabamento de superfícies do sistema REVO®, que oferece recursos de multissensor e proporciona escaneamento por contato de alta velocidade e inspeção por imagem sem contato em uma única CMM.

  [265kB]
• Data sheet: SFM-A1 [en]
  

  Data sheet: SFM-A1

  Datasheet for the SFM-A1 surface finish probe module. The SFP2 system consists of a probe and a range of SFM modules, each module is its own miniature measuring device, incorporating Renishaw’s proprietary encoder system to transduce the motion of the stylus tip.

  [175kB]
• Data sheet: SFM-A2 [en]
  

  Data sheet: SFM-A2

  Datasheet for the SFM-A2 surface finish probe module. The SFP2 system consists of a probe and a range of SFM modules, each module is its own miniature measuring device, incorporating Renishaw’s proprietary encoder system to transduce the motion of the stylus tip.

  [197kB]
• Data sheet: SFM-B1 [en]
  

  Data sheet: SFM-B1

  Datasheet for the SFM-B1 surface finish probe module. The SFP2 system consists of a probe and a range of SFM modules, each module is its own miniature measuring device, incorporating Renishaw’s proprietary encoder system to transduce the motion of the stylus tip.

  [164kB]
• Data sheet: SFM-B2 [en]
  

  Data sheet: SFM-B2

  Datasheet for the SFM-B2 surface finish probe module. The SFP2 system consists of a probe and a range of SFM modules, each module is its own miniature measuring device, incorporating Renishaw’s proprietary encoder system to transduce the motion of the stylus tip.

  [204kB]
• Data sheet: SFM-B3 [en]
  

  Data sheet: SFM-B3

  Datasheet for the SFM-B3 surface finish probe module. The SFP2 system consists of a probe and a range of SFM modules, each module is its own miniature measuring device, incorporating Renishaw’s proprietary encoder system to transduce the motion of the stylus tip.

  [166kB]
• Data sheet: SFM-B4 [en]
  

  Data sheet: SFM-B4

  Datasheet for the SFM-B4 surface finish probe module. The SFP2 system consists of a probe and a range of SFM modules, each module is its own miniature measuring device, incorporating Renishaw’s proprietary encoder system to transduce the motion of the stylus tip.

  [200kB]
• Data sheet: SFM-B5 [en]
  

  Data sheet: SFM-B5

  Datasheet for the SFM-B5 surface finish probe module. The SFP2 system consists of a probe and a range of SFM modules, each module is its own miniature measuring device, incorporating Renishaw’s proprietary encoder system to transduce the motion of the stylus tip.

  [187kB]
• Data sheet: SFM-C3 [en]
  

  Data sheet: SFM-C3

  Datasheet for the SFM-C3 surface finish probe module. The SFP2 system consists of a probe and a range of SFM modules, each module is its own miniature measuring device, incorporating Renishaw’s proprietary encoder system to transduce the motion of the stylus tip.

  [163kB]
• Data sheet: SFM-D1 [en]
  

  Data sheet: SFM-D1

  Datasheet for the SFM-D1 surface finish probe module. The SFP2 system consists of a probe and a range of SFM modules, each module is its own miniature measuring device, incorporating Renishaw’s proprietary encoder system to transduce the motion of the stylus tip.

  [163kB]
• Data sheet: SFM-E1 [en]
  

  Data sheet: SFM-E1

  Datasheet for the SFM-E1 surface finish probe module. The SFP2 system consists of a probe and a range of SFM modules, each module is its own miniature measuring device, incorporating Renishaw’s proprietary encoder system to transduce the motion of the stylus tip.

  [160kB]
• Data sheet: SFM-E2 [en]
  

  Data sheet: SFM-E2

  Datasheet for the SFM-E2 surface finish probe module. The SFP2 system consists of a probe and a range of SFM modules, each module is its own miniature measuring device, incorporating Renishaw’s proprietary encoder system to transduce the motion of the stylus tip.

  [164kB]
• Data sheet: SFM-G1 [en]
  

  Data sheet: SFM-G1

  Datasheet for the SFM-G1 surface finish probe module. The SFP2 system consists of a probe and a range of SFM modules, each module is its own miniature measuring device, incorporating Renishaw’s proprietary encoder system to transduce the motion of the stylus tip.

  [162kB]
• Data sheet: SFM-H1 [en]
  

  Data sheet: SFM-H1

  Datasheet for the SFM-H1 surface finish probe module. The SFP2 system consists of a probe and a range of SFM modules, each module is its own miniature measuring device, incorporating Renishaw’s proprietary encoder system to transduce the motion of the stylus tip.

  [170kB]
• Flyer: Calibration and capability artefacts for SFP2 surface finish probe [en]
  

  Flyer: Calibration and capability artefacts for SFP2 surface finish probe

  Surface finish measurement has traditionally involved the use of hand-held sensors or has required the part to be moved onto a costly dedicated measuring machine. The SFP2 probe for the REVO® 5-axis system changes all this, making surface finish inspection an integral part of CMM measurement, enabling the automatic switching between scanning, optical non-contact and surface finish measurement probe types.

  [606kB]
• Catálogo de Produto: Cabeçote motorizado PH20
  

  Catálogo de Produto: Cabeçote motorizado PH20

  PH20 oferece os exclusivos “contatos com cabeçote” para a medição rápida por contato, e rápido posicionamento infinito em 5 eixos para assegurar o acesso ideal aos detalhes da peça. PH20 utiliza o movimento do cabeçote para minimizar erros dinâmicos da MMC a velocidades de medição mais rápidas

  [264kB]

• User guide: REVO-2 [en]
  

  User guide: REVO-2

  User guide for the Renishaw REVO-2 dynamic measuring head and probe system. It is a revolutionary product designed to maximise measurement throughput whilst maintaining high system accuracy.

  [2.6MB]
• Installation & user's guide: RSP3 [en]
  

  Installation & user's guide: RSP3

  Installation and user guide for the RSP3 range of probes, giving REVO users the ability to carry cranked stylus arrangements and enhanced capability for carrying long styli.

  [1.6MB]
• Installation & user's guide: SFP2 [en]
  

  Installation & user's guide: SFP2

  Installation and user guide for the SFP2 surface finish probe system, bringing automated surface finish (roughness) measurement to CMMs as part of the REVO 5-axis multi-sensor measuring system.

  [1.6MB]
• User guide: RVP [en]
  

  User guide: RVP

  User guide for the RVP REVO vision probe, bringing non-contact vision measurement for use with the REVO-2 5-axis measurement system on co-ordinate measuring machines.

  [1.0MB]
• Installation & user's guide: RUP1 [en]
  

  Installation & user's guide: RUP1

  Installation and user guide for the RUP1 REVO ultrasonic probe system, bringing automated thickness measurement to CMMs as part of the REVO 5-axis multi-sensor measuring system.

  [1.7MB]
• Installation & user's guide: RTP1 [en]
  

  Installation & user's guide: RTP1

  Installation and user guide for the RTP1 REVO temperature probe, allowing the temperature of the part to be measured, recorded and used in logic. The innovative design provides excellent coupling between the probe and the material, enabling quick temperature measurement.

  [620kB]
• Installation & user's guide: PH20 - legacy [en]
  

  Installation & user's guide: PH20 - legacy

  Installation and user guide for Renishaw's PH20 5-axis technology measurement system for touch-trigger applications on all sizes of CMM.

  [1.7MB]

Tecnologia de 3 eixos

• Flyer: PH10 PLUS motorised probe head range [en]
  

  Flyer: PH10 PLUS motorised probe head range

  No description available

  [264kB]
• Flyer: PH10M-iQ PLUS [en]
  

  Flyer: PH10M-iQ PLUS

  PH10M-iQ PLUS – Less time calibrating, more time measuring

  [591kB]
• Data sheet: AM2 adjustment module [en]
  

  Data sheet: AM2 adjustment module

  Datasheet for the AM2 adjustment module, designed to provide quick and accurate angular alignment of the PH10MQ PLUS motorised probe head with the axes of the co-ordinate measuring machine and / or the autochange rack.

  [81kB]

• Installation & user's guide: PH10 PLUS [en]
  

  Installation & user's guide: PH10 PLUS

  Installation and user guide for the PH10 PLUS motorised probe head range, general purpose and versatile units designed specifically for use on direct computer controlled (DCC) coordinate measuring machines (CMMs).

  [960kB]
• Installation & user's guide: PH10M-iQ PLUS [en]
  

  Installation & user's guide: PH10M-iQ PLUS

  Installation and user guide for the PH10M-iQ PLUS, a derivitive of the PH10 PLUS range of heads. PH10M-iQ PLUS has inferred qualification meaning that after initial calibration is performed, all other positions of the head are inferred which eliminates the need to recalibrate each required head position.

  [872kB]
• Installation & user's guide: PHS-2 [en]
  

  Installation & user's guide: PHS-2

  Installation and user guide for the PHS-2 servo positioning head, designed to meet the arduous requirements of 'body-in-white' measurement, where fine angular position and long reach are needed.

  [3.3MB]

Cabeçotes manuais

• User guide: PH6M [en]
  

  User guide: PH6M

  User guide for the PH6M manual fixed head with autojoint connector for probes and adaptors.

  [361kB]
• User guide: MIH [en]
  

  User guide: MIH

  User guide for the Renishaw MIH compact manual indexable probe head , offering the flexibility and time saving normally associated with direct computer controlled (DCC) machines and motorised probe heads.

  [1.1MB]
• User guide: MH8 [en]
  

  User guide: MH8

  User guide for the MH8 manually operated, indexing probe head that articulates to provide orientation of the stylus.

  [370kB]
• User guide: MH20 and MH20i [en]
  

  User guide: MH20 and MH20i

  User guide for the MH20 and MH20i manually operated probe heads, that articulate to provide orientation of the probing axis. MH20 provides nonrepeatable orientation, while MH20i permits repeatable indexing at 15° increments marked on the A and B axes.

  [533kB]
• User guide: RTP20 [en]
  

  User guide: RTP20

  User guide for the RTP20 indexing head with the integral TP20 touch-trigger probe.

  [554kB]

Apalpadores de escaneamento

• Flyer: SP80 ultra-high accuracy scanning probe [en]
  

  Flyer: SP80 ultra-high accuracy scanning probe

  The SP80 quill mounted probe provides class-leading scanning performance, as well as the most flexible use of styli for maximum productivity.

  [267kB]

• Installation guide: SP25M [en]
  

  Installation guide: SP25M

  Installation guide for the SP25M scanning probe, providing information on the initial installation and integration of the Renishaw SP25M analogue scanning / measurement probe system.

  [1.2MB]
• User guide: SP25M, FCR25, ACR3 system [en]
  

  User guide: SP25M, FCR25, ACR3 system

  User guide for the SP25M, the world’s most compact and versatile scanning probe system, actually two sensors in one - enabling the user to scan for form measurement or reverse engineering and as a touch-trigger probe (TTP) for geometric size and position measurement.

  [2.0MB]
• Installation guide: SP80 and SP80H [en]
  

  Installation guide: SP80 and SP80H

  Installation and integration guide for the SP80, providing information to assist OEM and Renishaw personnel in the initial installation, integration and use of the Renishaw SP80 and SP80H ultra-high accuracy scanning probes. The SP80 and SP80H are quadrature output measurement probes that provide class-leading performance, as well as the most flexible use of styli for maximum productivity.

  [1.3MB]
• User guide: SP80 and SP80H [en]
  

  User guide: SP80 and SP80H

  User guide for the SP80 system, comprising the SP80 or SP80H ultra-high accuracy scanning probe, the probe interface and a rack system for stylus holder changing.

  [1.3MB]
• Installation & user's guide: SP600, SCR600 and AC1, AC2 [en]
  

  Installation & user's guide: SP600, SCR600 and AC1, AC2

  Installation and user guide for the SP600M, an auto-jointed, multiwired analogue scanning probe suitable for mounting on certain motorised and fixed Renishaw probe heads. SP600Q is a quill mounted version of the SP600M analogue scanning probe. SP600 is a shank mounted version of the SP600M analogue scanning probe.

  [887kB]

Apalpadores por contato

• Manual de Utilização: Sistema de apalpadores por toque
  

  Manual de Utilização: Sistema de apalpadores por toque

  No description available

  [481kB]
• Manual de Utilização: TP20
  

  Manual de Utilização: TP20

  No description available

  [981kB]
• Manual de Utilização: Apalpador TP200
  

  Manual de Utilização: Apalpador TP200

  H-1000-5014-03-C

  [313kB]
• Instructions for use: TP20 and TP200 cleaning [en]
  

  Instructions for use: TP20 and TP200 cleaning

  User instructions detailing how to effectively clean the location faces of TP20 and TP200 touch-trigger probes.

  [139kB]
• User guide: TP7 high accuracy touch-trigger probe system [en]
  

  User guide: TP7 high accuracy touch-trigger probe system

  User guide for the TP7M and TP7M EP (enhanced performance) high accuracy touch-trigger probe system, equipped with the Renishaw autojoint connector to enable repeatable, automatic probe changing when utilising the Renishaw autochange system.

  [480kB]
• Brochure: Stylus selection guide: TP7M probe and stylus kit [en]
  

  Brochure: Stylus selection guide: TP7M probe and stylus kit

  No description available

  [311kB]
• Brochure: Stylus selection guide: TP7M stylus kit [en]
  

  Brochure: Stylus selection guide: TP7M stylus kit

  No description available

  [125kB]
• User guide: TP8 manual indexable probe [en]
  

  User guide: TP8 manual indexable probe

  User guide for the TP8 manual indexable probe, a robust kinematic probe ideal for manual CMMs.

  [190kB]
• Installation & user's guide: NDI AUTOsense touch-trigger module - legacy [en]
  

  Installation & user's guide: NDI AUTOsense touch-trigger module - legacy

  The AUTOsense module is a dual function stylus holder that enables touch trigger probing for both single-point and scanning. The AUTOsense module is only compatible with supported NDI hand-held probes.

  [1.3MB]

Interfaces para apalpadores

• Installation guide: PI 7-3 [en]
  

  Installation guide: PI 7-3

  Installation guide for the PI 7-3 probe interface, a dual purpose interface designed to process signals from the TP7M strain gauge probe and standard touch-trigger probes (TP2, TP6, TP6A, TP20).

  [865kB]
• Installation guide: PI 200-3 [en]
  

  Installation guide: PI 200-3

  Installation guide for the PI 200-3 probe interface, a dual purpose interface designed to process signals from the TP200 strain gauge probe and standard touch-trigger probes (TP2, TP6, TP6A, TP20).

  [1.5MB]
• Installation guide: IS1-2 [en]
  

  Installation guide: IS1-2

  Installation guide for the IS1-2 interface selector, describing how it functions when used with multiple Renishaw probing systems, information on physical installation, system connections and interface settings, and fault-finding during the installation of a system.

  [648kB]

Comandos de máquinas e amplificadores

• Installation guide: PHC10-3 PLUS [en]
  

  Installation guide: PHC10-3 PLUS

  Installation guide for the PHC10-3 probe head controller, giving information on physical installation, system connections, communications and interface settings, as well as assistance in fault-finding during the installation of PHC10-3 PLUS.

  [986kB]
• Installation guide: UCC T3 PLUS and UCC S3 CMM controller [en]
  

  Installation guide: UCC T3 PLUS and UCC S3 CMM controller

  Installation guide for the UCC T3 and UCC S3, powerful 3-axis CMM controllers featuring built-in standard touch-trigger and TP200 interface, PH10 PLUS head controller and thermal error compensation (TEC). UCC S3 also features SP600 and SP25M interface.

  [1.6MB]
• Installation guide: UCC T3-2 [en]
  

  Installation guide: UCC T3-2

  Installation guide for the UCC T3-2, a powerful 3-axis CMM controller featuring built-in standard touch-trigger and TP200 interface.

  [1.3MB]
• Installation guide: UCC T5 [en]
  

  Installation guide: UCC T5

  Installation guide for the UCC T5, CMM controller for 5-axis touch-trigger motion and head control - PH20 only.

  [1.5MB]
• Installation guide: UCC S5 REVO-2 CMM controller [en]
  

  Installation guide: UCC S5 REVO-2 CMM controller

  Installation guide for the UCC S5 CMM controller, for 5-axis scanning motion and head control - REVO-2 only.

  [1.6MB]
• Installation guide: UCC BI - legacy [en]
  

  Installation guide: UCC BI - legacy

  The UCC BI is required for a CMM system which uses brushless motors. The UCC BI provides the interface between the CMM controller and the SPA2-2 (which provides power to the brushless motors).

  [1.4MB]
• Installation guide: UCC AI [en]
  

  Installation guide: UCC AI

  Installation guide for the UCC AI controller, required for large higher voltage CMM systems which may require motor voltages in excess of 80 V or motor currents in excess of 10 A.

  [917kB]
• Installation guide: UCC PI 80 [en]
  

  Installation guide: UCC PI 80

  Installation guide for the UCC PI 80, required for CMM systems which are fitted with Renishaw's SP80 scanning probe and facilitates the use of the UCC S3 as the machine controller.

  [787kB]
• Installation guide: UCC daughtercards - legacy [en]
  

  Installation guide: UCC daughtercards - legacy

  There is a range of UCC daughtercards available each card offering additional capabilities to the standard UCC1 or UCC2 product.

  [1.5MB]
• Leaflet: UCC daughtercards - legacy [en]
  

  Leaflet: UCC daughtercards - legacy

  No description available

  [54kB]
• Installation & user's guide: MCU - legacy [en]
  

  Installation & user's guide: MCU - legacy

  The manual control units are comprehensive CMM joystick controllers designed for use with Renishaw's universal CMM controller range.

  [1.0MB]
• Leaflet: MCU docking plate [en]
  

  Leaflet: MCU docking plate

  Information leaflet outlining the procedure for constructing the MCU docking station.

  [113kB]
• Guia de Instalação e do Usuário: MCUlite-2, MCU5-2 and MCU W-2 0 - Versão legada
  

  Guia de Instalação e do Usuário: MCUlite-2, MCU5-2 and MCU W-2 0 - Versão legada

  No description available

  [1.1MB]
• User guide: HCU2 [en]
  

  User guide: HCU2

  User guide for the HCU2 hand control unit, for use with all Renishaw PH10 motorised probe head systems.

  [234kB]
• Installation guide: SPAlite (H-1000-5107) - legacy [en]
  

  Installation guide: SPAlite (H-1000-5107) - legacy

  The SPAlite is a servo power amplifier designed specifically for use with the Renishaw UCC2 and UCClite controllers. The SPAlite is capable of controlling three axes of movement with configurable velocity feedback options to match the requirements of your installation.

  [354kB]
• Installation guide: SPA2-2 - legacy [en]
  

  Installation guide: SPA2-2 - legacy

  SPA2-2 servo power amplifier installation guide

  [1.4MB]
• Installation guide: SPA3 - legacy [en]
  

  Installation guide: SPA3 - legacy

  SPA3 is a servo power amplifier with enhancements for higher power and category 2 E-STOP. The high power capability combined with a compact form enables use of the SPA3 across a wide range of machines.

  [1.6MB]
• Installation guide: SPA3-2 [en]
  

  Installation guide: SPA3-2

  Installation guide for the SPA3-2, 3-axis dc servo power amplifier compatible with the UCC controller range and the MCUlite-2, MCU5-2 and MCU W-3 joysticks.

  [1.6MB]
• Manual: Digital servo power amplifiers [en]
  

  Manual: Digital servo power amplifiers

  This guide assists the task of setting up the servo response of the CMM when fitted with either an SPA2 or SPAlite servo power amplifier.

  [1.9MB]
• User guide: Product interconnection system (PICS) [en]
  

  User guide: Product interconnection system (PICS)

  User guide for the product interconnection system (PICS), describing the PICS connection between the Renishaw interface and the CMM controller, with the exception of the 'Types of input signal' and 'Cable connection' sections which briefly describe the PICS input connection to a Renishaw interface.

  [557kB]

Magazines e portas

• Data sheet: TCR20 [en]
  

  Data sheet: TCR20

  Datasheet for the TCR20 module change rack for PH20, based on the industry standard range of MCR20 rack systems, TCR20 securely stores modules for rapid automatic changing, protecting mating surfaces from any airborne contaminants within the working envelope of the machine.

  [417kB]

• User guide: Autochange system [en]
  

  User guide: Autochange system

  User guide for Renishaw's ACR1 autochange rack system.

  [2.6MB]
• Installation guide: Autochange system [en]
  

  Installation guide: Autochange system

  Installation and programmer's guide for Renishaw's ACR1 autochange rack system.

  [3.5MB]
• Installation guide: ACR2 [en]
  

  Installation guide: ACR2

  Installation guide for Renishaw's ACR2 autochange rack system, for use with the PHS servo positioning head system.

  [1.1MB]
• Installation & user's guide: ACR3 [en]
  

  Installation & user's guide: ACR3

  Installation and user guide for Renishaw's ACR3 autochange system, for use with the MRS (modular rack system).

  [1.3MB]
• Leaflet: ACR3 with powered port - power supply addendum [en]
  

  Leaflet: ACR3 with powered port - power supply addendum

  Leaflet for the ACR3 with powered port - power supply addendum.

  [43kB]
• Leaflet: RCP repair kit [en]
  

  Leaflet: RCP repair kit

  Leaflet detailing how to use the RCP repair kit.

  [309kB]
• Installation & user's guide: MRS [en]
  

  Installation & user's guide: MRS

  Installation and user guide for the Renishaw modular rack system (MRS), providing explanation of the MRS system and detailed installation instructions.

  [848kB]
• Leaflet: MRS adjustable footplates [en]
  

  Leaflet: MRS adjustable footplates

  User leaflet for MRS adjustable footplates. By using the optional MRS adjustable footplates, the MRS rail can be placed at different positions on the CMM’s bed, ensuring that a maximised working volume can be achieved.

  [111kB]
• Leaflet: MRS heavy duty legs [en]
  

  Leaflet: MRS heavy duty legs

  User leaflet for MRS heavy duty legs. Where an MRS installation has numerous SCP80s containing heavy stylus arrangements, or vertical stylus arrangements exceeding 190 mm, it is recommended that the optional MRS heavy duty leg kits are used to provide additional rigidity / height.

  [211kB]
• Installation guide: MRS2 [en]
  

  Installation guide: MRS2

  Installation guide for the Renishaw modular rack system (MRS2), providing detailed installation instructions.

  [4.6MB]
• Installation guide: REVO-2 change system port spacing guide [en]
  

  Installation guide: REVO-2 change system port spacing guide

  REVO-2 change system port spacing guide, detailing the correct spacing for each port and artefact. It is imperative that adjacent ports and artefacts are positioned correctly on the Renishaw modular rack system. Failure to position ports and artefacts correctly could result in the REVO head colliding with counterbalance arms, sensors or artefacts.

  [4.2MB]

Acessórios

• User guide: AM1 [en]
  

  User guide: AM1

  User guide for the AM1 adjustment module, designed for use with the PH6M and MIH manual probe heads and the PH10T PLUS and PH10M PLUS motorised probe heads.

  [159kB]
• User guide: MCG [en]
  

  User guide: MCG

  User guide for the Renishaw machine checking gauge (MCG), providing an easy way to monitor the volumetric measurement performance of your co-ordinate measuring machine (CMM). The MCG is an effective complement to existing standards for CMM verifi cation and can be used as an interim checking gauge in accordance with international standards BS EN ISO 10360-2.

  [538kB]
• User guide: MCG tools [en]
  

  User guide: MCG tools

  MCG tools is an Microsoft Excel workbook that manages the machine checking gauge (MCG). MCG tools allows the user to generate a DMIS part program in order to execute the MCG test on a co-ordinate measuring machine (CMM). It can then import the MCG data to analyze and identify whether geometrical errors exist on the CMM. Also, the results from every MCG test can be archived in order to follow the evolution of the geometry of a CMM over time.

  [822kB]
• Leaflet: Trigger force gauge guide [en]
  

  Leaflet: Trigger force gauge guide

  Leaflet for the trigger force gauge. Trigger force is the amount of pressure applied by the helical compression spring onto the pivotal plate and bearing points to hold the stylus mount in place.

  [63kB]
• Installation guide: Universal calibration tower assembly instructions [en]
  

  Installation guide: Universal calibration tower assembly instructions

  Assembly instructions for the universal calibration tower.

  [1.9MB]

Instalações CMM

• Manual de Utilização: Gabinete retrofit
  

  Manual de Utilização: Gabinete retrofit

  O gabinete de controlador da Renishaw é uma unidade montada em rack de 19 pol., usado para armazenar a linha de controladores, amplificadores servo-alimentados e interfaces da Renishaw. Fornece armazenagem e também um sistema exclusivo de conexão à CMM, resultando em uma instalação simples e organizada. Além da armazenagem de todos os equipamentos da Renishaw, o gabinete possui um sistema de fornecimento de energia integrado, com interruptor liga/desliga.

  [532kB]
• Installation guide: Retrofit desk assembly instructions [en]
  

  Installation guide: Retrofit desk assembly instructions

  Installation guide for the retrofit desk, including assembly instructions for cabinet mounted and stand-alone retrofit desk.

  [1.8MB]
• Manual: Switch and connector guide: Renishaw CMM products [en]
  

  Manual: Switch and connector guide: Renishaw CMM products

  This guide contains information on switches, connectors and signals of conventional Renishaw interfaces and controllers. It is of particular use to engineers involved in installation, support or upgrade activities associated with Renishaw CMM products.

  [1.4MB]
• Manual: CMM cables [en]
  

  Manual: CMM cables

  This guide contains comprehensive information on the most commonly used Renishaw cables. It is of particular use to engineers involved in installation or support of Renishaw equipment on CMMs, or where correct cable identification is required.

  [2.2MB]
• Leaflet: Upgrade brackets and blanking plates [en]
  

  Leaflet: Upgrade brackets and blanking plates

  This leaflet details the bracket options available when upgrading or replacing Renishaw controllers and / or probe interfaces. By using a combination of the following brackets and / or blanking panels, any combination of existing and new Renishaw product can be mounted together inside a 19 inch cabinet rack. The bracket kits shown in this leaflet are supplied with all the necessary fixtures.

  [147kB]