Installation manuals - CMM products

Browse documents

• Installation guide: ACR2
  

  Installation guide: ACR2

  Installation guide for Renishaw's ACR2 autochange rack system, for use with the PHS servo positioning head system.

  [1.1MB]
• Installation & user's guide: ACR3
  

  Installation & user's guide: ACR3

  Installation and user guide for Renishaw's ACR3 autochange system, for use with the MRS (modular rack system).

  [1.3MB]
• Installation guide: Autochange system (H-1000-6010) - legacy
  

  Installation guide: Autochange system (H-1000-6010) - legacy

  Renishaw's autochange equipment is the world's first integrated CMM probe exchange system. Mounted within the CMM's working envelope, the autochange system facilitates fast, automatic probe exchange without the need for re-qualification of the probe assembly.

  [608kB]
• Installation guide: IS1-2
  

  Installation guide: IS1-2

  Installation guide for the IS1-2 interface selector, describing how it functions when used with multiple Renishaw probing systems, information on physical installation, system connections and interface settings, and fault-finding during the installation of a system.

  [648kB]
• Installation & user's guide: MCUlite-2, MCU5-2 and MCU W-2 - legacy
  

  Installation & user's guide: MCUlite-2, MCU5-2 and MCU W-2 - legacy

  The MCUlite-2 is a basic entry level joystick . It has the controls necessary to control a 3-axis touch-trigger CMM and Renishaw head but without an LCD display screen. The MCU5-2 has been developed for use with Renishaw's REVO and PH20 systems.

  [1.1MB]
• Installation & user's guide: MRS
  

  Installation & user's guide: MRS

  Installation and user guide for the Renishaw modular rack system (MRS), providing explanation of the MRS system and detailed installation instructions.

  [848kB]
• Installation guide: MRS2
  

  Installation guide: MRS2

  Installation guide for the Renishaw modular rack system (MRS2), providing detailed installation instructions.

  [4.6MB]
• Installation & user's guide: NDI AUTOsense touch-trigger module - legacy
  

  Installation & user's guide: NDI AUTOsense touch-trigger module - legacy

  The AUTOsense module is a dual function stylus holder that enables touch trigger probing for both single-point and scanning. The AUTOsense module is only compatible with supported NDI hand-held probes.

  [1.3MB]
• Installation & user's guide: PH10 PLUS
  

  Installation & user's guide: PH10 PLUS

  Installation and user guide for the PH10 PLUS motorised probe head range, general purpose and versatile units designed specifically for use on direct computer controlled (DCC) coordinate measuring machines (CMMs).

  [960kB]
• Installation & user's guide: PH10M-iQ PLUS
  

  Installation & user's guide: PH10M-iQ PLUS

  Installation and user guide for the PH10M-iQ PLUS, a derivitive of the PH10 PLUS range of heads. PH10M-iQ PLUS has inferred qualification meaning that after initial calibration is performed, all other positions of the head are inferred which eliminates the need to recalibrate each required head position.

  [872kB]
• Installation & user's guide: PH20
  

  Installation & user's guide: PH20

  Installation and user guide for Renishaw's PH20 5-axis technology measurement system for touch-trigger applications on all sizes of CMM.

  [1.7MB]
• Installation guide: PHC10-3 PLUS
  

  Installation guide: PHC10-3 PLUS

  Installation guide for the PHC10-3 probe head controller, giving information on physical installation, system connections, communications and interface settings, as well as assistance in fault-finding during the installation of PHC10-3 PLUS.

  [986kB]
• Installation & user's guide: PHS-2
  

  Installation & user's guide: PHS-2

  Installation and user guide for the PHS-2 servo positioning head, designed to meet the arduous requirements of 'body-in-white' measurement, where fine angular position and long reach are needed.

  [3.3MB]
• Installation guide: PI 200-3
  

  Installation guide: PI 200-3

  Installation guide for the PI 200-3 probe interface, a dual purpose interface designed to process signals from the TP200 strain gauge probe and standard touch-trigger probes (TP2, TP6, TP6A, TP20).

  [1.5MB]
• Installation guide: PI 7-3
  

  Installation guide: PI 7-3

  Installation guide for the PI 7-3 probe interface, a dual purpose interface designed to process signals from the TP7M strain gauge probe and standard touch-trigger probes (TP2, TP6, TP6A, TP20).

  [865kB]
• User guide: Retrofit cabinet (H-1000-5186) - legacy
  

  User guide: Retrofit cabinet (H-1000-5186) - legacy

  Renishaw's controller cabinet is a standard 19 inch rack mounting unit that is used for storing Renishaw's range of controllers, servo power amplifiers and interfaces. This cabinet provides a unique connection to the CMM resulting in a neat and tidy installation. As well as providing storage for all the Renishaw controller equipment the cabinet has an integral mains system with on/off switch.

  [684kB]
• Installation & user's guide: RSP3
  

  Installation & user's guide: RSP3

  Installation and user guide for the RSP3 range of probes, giving REVO users the ability to carry cranked stylus arrangements and enhanced capability for carrying long styli.

  [1.6MB]
• Installation & user's guide: SFP2
  

  Installation & user's guide: SFP2

  Installation and user guide for the SFP2 surface finish probe system, bringing automated surface finish (roughness) measurement to CMMs as part of the REVO 5-axis multi-sensor measuring system.

  [1.6MB]
• Installation guide: SP25M
  

  Installation guide: SP25M

  Installation guide for the SP25M scanning probe, providing information on the initial installation and integration of the Renishaw SP25M analogue scanning / measurement probe system.

  [1.2MB]
• Installation & user's guide: SP600, SCR600 and AC1, AC2
  

  Installation & user's guide: SP600, SCR600 and AC1, AC2

  Installation and user guide for the SP600M, an auto-jointed, multiwired analogue scanning probe suitable for mounting on certain motorised and fixed Renishaw probe heads. SP600Q is a quill mounted version of the SP600M analogue scanning probe. SP600 is a shank mounted version of the SP600M analogue scanning probe.

  [887kB]
• Installation guide: SP80 and SP80H
  

  Installation guide: SP80 and SP80H

  Installation and integration guide for the SP80, providing information to assist OEM and Renishaw personnel in the initial installation, integration and use of the Renishaw SP80 and SP80H ultra-high accuracy scanning probes. The SP80 and SP80H are quadrature output measurement probes that provide class-leading performance, as well as the most flexible use of styli for maximum productivity.

  [1.3MB]
• Installation guide: SPA2-2 - legacy
  

  Installation guide: SPA2-2 - legacy

  SPA2-2 servo power amplifier installation guide

  [1.4MB]
• Installation guide: UCC S5 REVO-2 CMM controller
  

  Installation guide: UCC S5 REVO-2 CMM controller

  Installation guide for the UCC S5 CMM controller, for 5-axis scanning motion and head control - REVO-2 only.

  [1.6MB]
• Installation guide: UCC T3 PLUS and UCC S3 CMM controller
  

  Installation guide: UCC T3 PLUS and UCC S3 CMM controller

  Installation guide for the UCC T3 and UCC S3, powerful 3-axis CMM controllers featuring built-in standard touch-trigger and TP200 interface, PH10 PLUS head controller and thermal error compensation (TEC). UCC S3 also features SP600 and SP25M interface.

  [1.6MB]
• Installation guide: UCC T3-2
  

  Installation guide: UCC T3-2

  Installation guide for the UCC T3-2, a powerful 3-axis CMM controller featuring built-in standard touch-trigger and TP200 interface.

  [1.3MB]
• Installation guide: UCC T5
  

  Installation guide: UCC T5

  Installation guide for the UCC T5, CMM controller for 5-axis touch-trigger motion and head control - PH20 only.

  [1.5MB]