WiRE 5 training modules (Virsa)

The information contained in these pages is strictly confidential. Recording or distribution of this information on any medium is not permitted without prior written permission from Renishaw.

PDFs - General

Training module: WiRE 5 TM001 - Introduction to Raman spectroscopy

Training module: WiRE 5 TM001 - Introduction to Raman spectroscopy

The aim of Raman spectroscopy is to analyse the Raman scattered light and infer from it as much as possible about the chemistry and structure of the material.
[321kB]
Training module: WiRE 5 TM027 - Experimental process and inVia options

Training module: WiRE 5 TM027 - Experimental process and inVia options

The inVia and WiRE 5 software together enable almost any Raman or photoluminescence experiment to be performed due to the very high performance and flexibility of configurations on a single system. This is used for a multitude of analysis requirements, from simple material identification to more complex multi-dimensional imaging, and combined multi-technique analysis (e.g. combined AFM or SEM analysis). This document aims to explain how to use the inVia instrument and WiRETM software to most efficiently achieve these different sample analyses aims.
[65kB]
Training module: WiRE 5.4 TM018 - Importing viewing and saving spectral and image data

Training module: WiRE 5.4 TM018 - Importing viewing and saving spectral and image data

This document aims to show the WiRE™ 5.4 user how to import spectral data of different formats into WiRE. It also discusses the different viewing and saving options for mapping data.
[1.0MB]
Training module: WiRE 5 TM019 - Labelling and printing

Training module: WiRE 5 TM019 - Labelling and printing

This document aims to show the WiRE™ 5 user how to use labelling functionality in windows
[258kB]
Training module: WiRE 5.1 TM020 - 21 CFR pt 11 compliance

Training module: WiRE 5.1 TM020 - 21 CFR pt 11 compliance

This document shows the WiRE™ 5.1 user how to set up and use the integrated 21 CFR pt 11 functionality
[208kB]
Training module: WiRE 5 TM026 - FAQ

Training module: WiRE 5 TM026 - FAQ

This module offers a list of common questions and problems; offering possible solutions to them without having to delve into the manual or contact Renishaw for technical support.
[168kB]
Training module: WiRE 5.1 TM030 - Export report

Training module: WiRE 5.1 TM030 - Export report

This document aims to show the WiRE™ user how to automatically generate a report (Microsoft® Word, html and Microsoft® PowerPoint® formats) using the ‘Export report’ function.
[729kB]

PDFs - Preparing inVia for use (system start-up)

Training module: WiRE 5 TM002 - Introduction to WiRE and System start-up

Training module: WiRE 5 TM002 - Introduction to WiRE and System start-up

The aim of this module is to provide a general overview of the WiRE software, and detail the correct procedure for Raman microscope, laser, PC, and software start-up.
[588kB]
Training module: TM053 WiRE 5.4 performance verification

Training module: TM053 WiRE 5.4 performance verification

This document shows the WiRE™ user how to use the WiRE Performance Verification software.
[482kB]

PDFs - Optimising sample viewing and image capture

Training module: WiRE 5.4 TM003 - Sample viewing and configuration change

Training module: WiRE 5.4 TM003 - Sample viewing and configuration change

This module details recommended procedures for: 1.Viewing different types of samples using the Renishaw video. 2.Selecting different laser / grating / CCD camera configurations within the inVia Raman microscope.
[640kB]
Training module: WiRE 5.4 TM007 - White light image capture montaging and Surface (inVia)

Training module: WiRE 5.4 TM007 - White light image capture montaging and Surface (inVia)

This document aims to show the WiRE™ 5.4 user how to collect and save white light images and montages from the microscope camera, and set-up the Surface option.
[1.2MB]
Training module: WiRE 5.3 TM052 - Cleaning objective lenses

Training module: WiRE 5.3 TM052 - Cleaning objective lenses

This document provides an overview of how to clean the objective lens used on your Raman instrument. The most common reason you may not be obtaining high quality white light image viewing or optimum spectral results is due to the objective lens surface being contaminated.
[106kB]

PDFs - Selecting configurations

Training module: WiRE 5.4 TM003 - Sample viewing and configuration change

Training module: WiRE 5.4 TM003 - Sample viewing and configuration change

This module details recommended procedures for: 1.Viewing different types of samples using the Renishaw video. 2.Selecting different laser / grating / CCD camera configurations within the inVia Raman microscope.
[640kB]

PDFs - Setting up measurements and collecting data

Training module: WiRE 5.3 TM004 - Data acquisition and measurement set-up

Training module: WiRE 5.3 TM004 - Data acquisition and measurement set-up

The aim of this module is to detail the correct use of WiRE™ 5.3 to enable spectral data collection using the different measurement parameters available in conjunction with the inVia Raman microscope.
[334kB]
Training module: WiRE 5 TM005 - Depth profiling

Training module: WiRE 5 TM005 - Depth profiling

This document aims to show the WiRE™ 5 user how to perform depth profiling measurements.
[82kB]
Training module: WiRE 5.3 TM008 - Point imaging

Training module: WiRE 5.3 TM008 - Point imaging

This document aims to show the WiRE™ 5.3 user how to set up a basic mapping measurement (point imaging).
[367kB]
Training module: WiRE 5 TM029 StreamHR Rapide imaging

Training module: WiRE 5 TM029 StreamHR Rapide imaging

This document aims to show the WiRE™ 5 user how to use the StreamHR Rapide fast imaging mode in conjunction with the Andor EM-CCD detector. It assumes the appropriate password has been entered and that all necessary hardware is present which enables the capability.
[287kB]
Training module: WiRE 5 TM011 - 3D imaging

Training module: WiRE 5 TM011 - 3D imaging

This document aims to show the WiRE™ 5 users how to collect, process, analyse and view 3D volume data.
[679kB]
Training module: WiRE 5.1 TM012 - Data processing and simple analysis

Training module: WiRE 5.1 TM012 - Data processing and simple analysis

This document aims to show the WiRE™ 5.1 user how to process single spectra and perform basic analysis.
[899kB]
Training module: WiRE 5 TM013 - Multi-file processing

Training module: WiRE 5 TM013 - Multi-file processing

This document aims to show the WiRE™ 5 user how and when to use post processing methods for the removal of cosmic ray features and spectral noise, in multi-file data.
[800kB]
Training module: WiRE 5 TM036 Rapide measurements

Training module: WiRE 5 TM036 Rapide measurements

This document aims to show the WiRE™ 5 user how to set-up Rapide measurements within WiRE 5. It assumes that the user is familiar with the basic operation of the software, the appropriate password(s) have been entered and that all necessary hardware is present which allows the capability.
[401kB]
Training module: WiRE 5.3 TM050 - Correlate

Training module: WiRE 5.3 TM050 - Correlate

This document aims to show the WiRE™ 5.3 user how to use the Correlate™ module, a feature of WiRE that allows the user to smoothly overlay a Raman image, with an image of the same sample taken with an alternative microscopy technique.
[764kB]
Training module: WiRE 5.3 TM051 - Laser spot size

Training module: WiRE 5.3 TM051 - Laser spot size

This document will show the inVia™ confocal Raman microscope user how the laser spot size can vary due to the use of different objective lenses and laser wavelengths, and how this should be considered when conducting measurements.
[315kB]
Training module: WiRE 5.5 TM056 Monitor

Training module: WiRE 5.5 TM056 Monitor

The purpose of this training module is to introduce the WiRE™ 5 user to the Monitor software, to continuously monitor physicochemical processes and quality analyses of materials.
[1.2MB]

PDFs - Processing data

Training module: WiRE 5 TM013 - Multi-file processing

Training module: WiRE 5 TM013 - Multi-file processing

This document aims to show the WiRE™ 5 user how and when to use post processing methods for the removal of cosmic ray features and spectral noise, in multi-file data.
[800kB]

PDFs - Analysing data

Training module: WiRE 5.1 TM012 - Data processing and simple analysis

Training module: WiRE 5.1 TM012 - Data processing and simple analysis

This document aims to show the WiRE™ 5.1 user how to process single spectra and perform basic analysis.
[899kB]
Training module: WiRE 5.3 TM016 - Library searching and creation

Training module: WiRE 5.3 TM016 - Library searching and creation

This document shows the WiRE™ 5.3 user how to search their spectra against Raman spectral libraries, and how to create their own libraries.
[821kB]
Training module: WiRE 5 TM014 - Multi-file data analysis (univariate)

Training module: WiRE 5 TM014 - Multi-file data analysis (univariate)

This document aims to show the WiRE™ 5 user how to analyse multifile Raman data (linear/area) to create profiles or images based on a simple single value variation.
[141kB]
Training module: WiRE 5 TM032 - Dynamic mapping

Training module: WiRE 5 TM032 - Dynamic mapping

This document aims to show the WiRE™ user how to use the dynamic mapping function to preview and create Raman images from multifile Raman data (2D area). It assumes that the WiRE™ 5 software has been installed correctly with the required passwords and that the inVia instrument has an encoded mapping microscope stage.
[258kB]
Training module: WiRE 5.2 TM015 – Multi-file data analysis (multivariate)

Training module: WiRE 5.2 TM015 – Multi-file data analysis (multivariate)

This document aims to show the WiRE™ 5.2 user how and when to use multivariate data analysis methods on image data.
[2.9MB]
Training module: WiRE 5.1 TM034 - WiRE look-up table control

Training module: WiRE 5.1 TM034 - WiRE look-up table control

This document aims to show the WiRE™ 5.1 user how to use the Look-up-table (LUT) control for optimising the display of images and data.
[672kB]
Training module: WiRE 5.5 TM017 – Image analysis

Training module: WiRE 5.5 TM017 – Image analysis

This document shows the WiRE™ 5 user how to use the image analysis software. It assumes the appropriate feature permission has been activated.
[421kB]
Training module: WiRE 5.2 TM047 – Masking of data

Training module: WiRE 5.2 TM047 – Masking of data

This document shows the WiRE™ 5 user how and when to use data masking methods on map data.
[908kB]
Training module: WiRE 5.2 TM048 - Create map from singles

Training module: WiRE 5.2 TM048 - Create map from singles

This document aims to show the WiRE™ 5 user how to use the Create map from singles tool. It assumes that WiRE software is installed.
[132kB]
Training module: WiRE 5.5 TM055 Partial least squares

Training module: WiRE 5.5 TM055 Partial least squares

This document shows the WiRE™ 5 user how to perform Partial Least Squares on spectral data.
[1.1MB]

Movies - General

Training module: WiRE 5.1 TM018(MO) Viewing and saving image data
Training module: WiRE 4 TM018(MO) Importing and saving Raman data
Training module: WiRE 5.1 TM030(MO) Report generation
Training module: WiRE 5.2 TM047(MO) Masking of data

Movies - Optimising sample viewing and image capture

Training module: WiRE 4 TM007(MO) An introduction to surface
Training module: WiRE 4 TM007(MO) Defining a surface
Training module: WiRE 4 TM007(MO) Applying a surface to white light images and montages
Training module: WiRE 4 TM007(MO) Applying a surface to map data collection

Movies - Processing data

Training module: WiRE 4 TM013(MO) Cosmic ray removal
Training module: WiRE 4 TM013(MO) Noise filtering

Movies - Analysing data

Training module: WiRE 5.3 TM016(MO) Library searching and creation
Training module: WiRE 5.1 TM034(MO) Look up table

Can't find the answer you're looking for?

When you need help, Renishaw's teams of scientists and engineers are here to provide you with expert advice, as well as product, technical, and applications support.

Accessories

Renishaw provides a wide range of accessories inlcuding light collection optics and environmental cells, so you can adapt your Raman system to suit your requirements.

This content is only available to approved users.

If you would like to access this content, please email us. We will need to know your name, company name, job title and reason for accessing the content.