Navigation
Lifting
This denotes the lifting points on the cabinet:
NOTE: Lifting must only be carried out by the cabinet installer. Please contact the cabinet installer.
The CMM controller cabinet is lifted using the four eye bolts supplied.
Unscrew the four bolts securing the cabinet lid and remove.
Secure the four eye bolts in place in the holes labelled lifting points.
Use suitable slings as shown below.
WARNING: Specified cabinet weight is 65 kg with no control equipment installed. Please make provision for the weight of any equipment that is installed in the cabinet.
Following lifting, remove eye bolts and store within the controller cabinet. Keep eye bolts together using a cable tie or similar.
Replace the lid and bolt back in place ensuring the gasket washers are installed on each bolt.