Navigation

UCC T3 PLUS and UCC S3 references and associated documents

The following Renishaw documents are referred to in this document or may be a source of further relevant information. They can easily be acquired from Renishaw website www.renishaw.com.

Renishaw documents

Installation & user's guide: PH10 PLUS

Installation & user's guide: PH10 PLUS

Installation and user guide for the PH10 PLUS motorised probe head range, general purpose and versatile units designed specifically for use on direct computer controlled (DCC) coordinate measuring machines (CMMs).
[960kB]
Installation guide: SPA3-2

Installation guide: SPA3-2

Installation guide for the SPA3-2, 3-axis dc servo power amplifier compatible with the UCC controller range and the MCUlite-2, MCU5-2 and MCU W-3 joysticks.
[1.6MB]
Installation & user's guide: MCUlite-2 and MCU5-2

Installation & user's guide: MCUlite-2 and MCU5-2

Installation and user guide for the Renishaw MCUlite-2 and MCU5-2 manual control units, CMM joysticks designed for use with Renishaw's range of UCC controllers.
[751kB]
Installation & user's guide: MCU W-3

Installation & user's guide: MCU W-3

Installation and user guide for the Renishaw MCU W-3 wireless manual control unit, a CMM joystick designed for use with Renishaw's range of UCC controllers.
[12.5MB]
User guide: TP200 and SCR200 probe system

User guide: TP200 and SCR200 probe system

User guide for the TP200 / TP200B, a 13.5 mm diameter touch-trigger probe with the facility to quickly change stylus configurations without the need for requalification. The optional SCR200 stylus change rack provides storage for pre-qualified stylus assemblies and facilitates automatic stylus changing under measurement program control.
[1.2MB]
Installation guide: PI 200-3

Installation guide: PI 200-3

Installation guide for the PI 200-3 probe interface, a dual purpose interface designed to process signals from the TP200 strain gauge probe and standard touch-trigger probes (TP2, TP6, TP6A, TP20).
[1.5MB]
User guide: SP25M, FCR25, ACR3 system

User guide: SP25M, FCR25, ACR3 system

User guide for the SP25M, the world’s most compact and versatile scanning probe system, actually two sensors in one - enabling the user to scan for form measurement or reverse engineering and as a touch-trigger probe (TTP) for geometric size and position measurement.
[2.0MB]
User guide: Product interconnection system (PICS)

User guide: Product interconnection system (PICS)

User guide for the product interconnection system (PICS), describing the PICS connection between the Renishaw interface and the CMM controller, with the exception of the 'Types of input signal' and 'Cable connection' sections which briefly describe the PICS input connection to a Renishaw interface.
[557kB]
User guide: AM1

User guide: AM1

User guide for the AM1 adjustment module, designed for use with the PH6M and MIH manual probe heads and the PH10T PLUS and PH10M PLUS motorised probe heads.
[159kB]
Data sheet: AM2 adjustment module (H-1000-2051)

Data sheet: AM2 adjustment module (H-1000-2051)

Datasheet for the AM2 adjustment module, designed to provide quick and accurate angular alignment of the PH10MQ PLUS motorised probe head with the axes of the co-ordinate measuring machine and / or the autochange rack.
[81kB]
Installation & user's guide: SP600, SCR600 and AC1, AC2

Installation & user's guide: SP600, SCR600 and AC1, AC2

Installation and user guide for the SP600M, an auto-jointed, multiwired analogue scanning probe suitable for mounting on certain motorised and fixed Renishaw probe heads. SP600Q is a quill mounted version of the SP600M analogue scanning probe. SP600 is a shank mounted version of the SP600M analogue scanning probe.
[887kB]