Universal 3-axis touch-trigger manual head solution.
3-axis touch-trigger automated head solution.
Universal 3-axis scanning and touch-trigger automated head solution.
5-axis touch-trigger automated head solution.
CMM controller for 5-axis scanning motion and head control - REVO-2 only.
The UCC BI is required for a CMM system which uses brushless motors.
The UCC AI is required for large higher voltage CMM systems which may require motor voltages in excess of 80 V or motor currents in excess of 10 A.
The UCC PI 80 is required for CMM systems which are fitted with Renishaw's SP80 scanning probe and facilitates the use of the UCC S3 as the machine controller.
The interface between a manual CMM and a user (via a PC).
PHC10-3 PLUS head controller receives instructions from the CMM control. The PHC10-3 PLUS controls all head functions and reports system status to the CMM:
A range of multi-functional joysticks for use with UCC controllers.
4-channel digital servo power amplifier with an integral power supply
Servo power amplifier with enhancements for higher power and category 2 E-STOP
The ACC2-3 handles the communications to and from the CMM controller, controls the ACR1 autochange rack and multiplexes and interfaces the head and datum probe signals.
IU80 interpolator unit
AC3 analogue interface PC card