Data sheets - Machine tool products

To search, enter your product name

• Data sheet: AxiSet™ Check-Up
  

  Data sheet: AxiSet™ Check-Up

  Renishaw’s AxiSet™ Check-Up system is a cost-effective solution for checking the alignment and positioning performance of rotary axes.

  [164kB]
• Data sheet: Adaptors, Extensions and Holders for Probes
  

  Data sheet: Adaptors, Extensions and Holders for Probes

  Data sheet: The modular mounting system for machine tool touch trigger probes.

  [593kB]
• Data sheet: EasyProbe software for machining centres
  

  Data sheet: EasyProbe software for machining centres

  Data sheet - EasyProbe software for machining centres

  [30kB]
• Data sheet: FS1i and FS2i sockets
  

  Data sheet: FS1i and FS2i sockets

  No description available

  [78kB]
• Installation guide: FS sockets and extension bars
  

  Installation guide: FS sockets and extension bars

  No description available

  [701kB]
• Data sheet: High power optical transmission system
  

  Data sheet: High power optical transmission system

  The high power optical transmission system is based upon standard optical systems, enhancements allowing the system to transmit up to 12 m (39.3 ft) and benefiting from reflections to maintain contact with the receiver. It enables the use of the MP700E and MP10E in applications requiring large probe and receiver separation.

  [164kB]
• Data sheet: High precision tool setting arm (HPA) for CNC lathes
  

  Data sheet: High precision tool setting arm (HPA) for CNC lathes

  The HPA combined with a tool setting probe, allows big reductions in tool setting times.

  [263kB]
• Data sheet: HPGA
  

  Data sheet: HPGA

  The HPGA is a motorised tool setting arm, for use on both CNC lathes and grinding machines.

  [559kB]
• Catálogo de Produto: Braço motorizado e interface HPMA e TSI 3 / TSI 3-C [pt]
  

  Catálogo de Produto: Braço motorizado e interface HPMA e TSI 3 / TSI 3-C

  Medição de ferramenta e detecção de ferramenta quebrada em tornos CNC de 2 e 3 eixos

  [454kB]
• Data sheet: HPPA and TSI 2 / TSI 2-C pulldown arm and interface
  

  Data sheet: HPPA and TSI 2 / TSI 2-C pulldown arm and interface

  Tool measuring on 2-axis and 3-axis CNC lathes

  [426kB]
• Data sheet: HSI high speed interface
  

  Data sheet: HSI high speed interface

  The HSI processes signals from or standard hard-wired probes and converts them into machine outputs, which are then transmitted to the CNC control.

  [225kB]
• Data sheet: Inspection Plus with SupaTouch
  

  Data sheet: Inspection Plus with SupaTouch

  Inspection Plus with SupaTouch is a machine‑resident software application providing significant improvements to the speed and metrology of component inspection cycles.

  [46kB]
• Data sheet: LP2 DD and LP2H DD probes
  

  Data sheet: LP2 DD and LP2H DD probes

  For use on grinding machines and other applications subject to particle laden coolant. H-2000-2095-01-E. Use in conjunction with LP2 Probe Data sheet - Part No. H-2000-2100.

  [49kB]
• Data sheet: LP2 modular probe system for tool setting and workpiece inspection
  

  Data sheet: LP2 modular probe system for tool setting and workpiece inspection

  Workpiece inspection and job set-up on all sizes of lathes, machining centres and CNC grinders.

  [374kB]
• Data sheet: LP2 probe with hard wired signal transmission
  

  Data sheet: LP2 probe with hard wired signal transmission

  Workpiece set-up and inspection system for machining centres with manual tool change

  [106kB]
• Data sheet: LTO2 systems for CNC lathes
  

  Data sheet: LTO2 systems for CNC lathes

  LTO2 Optical Signal Transmission Systems for CNC Lathes data sheet.

  [954kB]
• Data sheet: LTO2S / LTO2S-R systems for CNC lathes
  

  Data sheet: LTO2S / LTO2S-R systems for CNC lathes

  LTO2S and LTO2S-R Optical Signal Transmission Systems for CNC Lathes.

  [458kB]
• Data sheet: LTO2T / LTO2T-R systems for CNC lathes
  

  Data sheet: LTO2T / LTO2T-R systems for CNC lathes

  H-2000-2019-03-A

  [577kB]
• Data sheet: Mark IV inductive transmission system
  

  Data sheet: Mark IV inductive transmission system

  Maintenance-free, secure signal transmission system between probe and CNC control

  [418kB]
• Data sheet: MI 12 interface unit
  

  Data sheet: MI 12 interface unit

  The MI 12 interface processes signals between one or two OMM's and the CNC machine control. (The MI 12 replaces the earlier MI 4 and MI 7 interface units).

  [122kB]
• Data sheet: MI 5 interface unit
  

  Data sheet: MI 5 interface unit

  The MI 5 interface unit is part of a hard wired or inductive transmission probe system. It is used with CNC machine tools for workpiece set up and inspection. The MI 5 converts probe signals into an acceptable form for the CNC machine control.

  [95kB]
• Data sheet: MI 8-4 interface unit
  

  Data sheet: MI 8-4 interface unit

  The MI 8-4 interface processes the probe signal from a hard wired probe and converts it into the correct format to connect into a controller's probe input.

  [289kB]
• Data sheet: MI 8 interface unit
  

  Data sheet: MI 8 interface unit

  The MI 8 interface processes signals from Renishaw hard wired probes and converts the signals into voltage free solid state relay (SSR) output, for transmission to the CNC machine control.

  [87kB]
• Data sheet: MP1 probe
  

  Data sheet: MP1 probe

  No description available

  [405kB]
• Data sheet: MP10 probe system
  

  Data sheet: MP10 probe system

  H-2000-2262-02-D

  [232kB]
• Data sheet: MP11 probe system
  

  Data sheet: MP11 probe system

  The productivity gains obtained when probing on CNC machines with automatic tool change, are now available for CNC machines with manual tool change.

  [123kB]
• Data sheet: MP12 probe system
  

  Data sheet: MP12 probe system

  Data sheet: MP12 probe system

  [795kB]
• Data sheet: MP16 radio probe system
  

  Data sheet: MP16 radio probe system

  MP3 touch trigger probe with selectable channel radio transmission.

  [283kB]
• Data sheet: MP18 compact radio probe system
  

  Data sheet: MP18 compact radio probe system

  MP18 compact probe system with selectable channel radio transmission

  [303kB]
• Catálogo de Produto: Apalpador MP250 [pt]
  

  Catálogo de Produto: Apalpador MP250

  No description available

  [117kB]
• Data sheet: MP3 - 360 degree optical transmission system
  

  Data sheet: MP3 - 360 degree optical transmission system

  Generous probe stylus overtravel combined with the 360 optical signal transmission, makes the system very suitable for workpiece set-up and inspection on medium/large machining centres.

  [202kB]
• Data sheet: MP3 - 360° induction transmission system
  

  Data sheet: MP3 - 360° induction transmission system

  No description available

  [271kB]
• Data sheet: MP3 probe system
  

  Data sheet: MP3 probe system

  Robust construction and generous stylus overtravel make the MP3 ideal for larger machines.

  [144kB]
• Data sheet: MP3 - radio transmission system
  

  Data sheet: MP3 - radio transmission system

  A probe system for 5-axis or large gantry type machining centres

  [192kB]
• Data sheet: MP3 - wide angle optical transmission
  

  Data sheet: MP3 - wide angle optical transmission

  MP3 probe

  [181kB]
• Data sheet: MP7 and MP9 probes
  

  Data sheet: MP7 and MP9 probes

  H-2000-2261-07-B

  [127kB]
• Data sheet: MP700 probe system
  

  Data sheet: MP700 probe system

  Data sheet for Renishaw's MP700 high accuracy touch probe

  [201kB]
• Data sheet: MP8 probe system
  

  Data sheet: MP8 probe system

  The MP8 shank on/off switch is automatically pressed on, during the time the probe is held in the machine spindle.

  [72kB]
• Data sheet: NC1 non-contact tool setting system accessories
  

  Data sheet: NC1 non-contact tool setting system accessories

  The NC1 system is now obsolete. Renishaw recommends upgrading your NC1 system to the NC3 or NC4 systems.

  [1021kB]
• Data sheet: NC2 non-contact broken tool detection system
  

  Data sheet: NC2 non-contact broken tool detection system

  NC2 laser based non-contact broken tool detection system. Broken tool detection anywhere along the beam.

  [416kB]
• Data sheet: NC3 non-contact tool setting system
  

  Data sheet: NC3 non-contact tool setting system

  NC3 non-contact tool setting system

  [320kB]
• Catálogo de Produto: Série de presets de ferramentas sem contato NC4+ Blue [pt]
  

  Catálogo de Produto: Série de presets de ferramentas sem contato NC4+ Blue

  Preset de ferramentas e detecção de ferramenta quebrada sem contato de alta precisão e velocidade em todos os tamanhos de centros de usinagem horizontais, verticais e tipo portal.

  [378kB]
• Data sheet: NCi-4 non-contact tool setting interface
  

  Data sheet: NCi-4 non-contact tool setting interface

  The NCi-4 interface is used with Renishaws NC1, NC3 or NC4 non-contact tool setting systems. It processes signals from the non-contact unit and converts them into a voltage-free solid state relay (SSR) output, for transmission to the CNC machine control. The NCi-4 features a drip rejection mode allowing it to filter out random drops of coolant without triggering the system.

  [388kB]
• Data sheet: NCi-5
  

  Data sheet: NCi-5

  NCi-5 non-contact tool setting interface

  [1.1MB]
• Data sheet: NCPCB tool setting device
  

  Data sheet: NCPCB tool setting device

  The NCPCB tool setting device is used for rapid tool setting, tool wear monitoring, runout checking, and tool breakage detection on PCB drilling machines

  [138kB]
• Catálogo de Produto: OLP40 - Apalpador óptico para tornos [pt]
  

  Catálogo de Produto: OLP40 - Apalpador óptico para tornos

  Inspeção de peças e preparação de trabalho em todos os tamanhos de tornos e máquinas multitarefas pequenas.

  [285kB]
• Data sheet: OMI-2 optical machine interface
  

  Data sheet: OMI-2 optical machine interface

  The OMI-2 is a combined optical receiver/interface, which conveys and processes signals between an inspection probe and the CNC machine control.

  [151kB]
• Data sheet: OMI-2C optical machine interface
  

  Data sheet: OMI-2C optical machine interface

  The OMI-2C is a combined optical receiver/interface, which conveys and processes signals between an inspection probe and the CNC machine control.

  [119kB]
• Data sheet: OMI-2T
  

  Data sheet: OMI-2T

  The OMI-2T is a combined optical transmitter/receiver and machine interface, designed for mounting within the machine’s working envelope.

  [1.2MB]
• Catálogo de Produto: OMP400 apalpador óptico para máquinas [pt]
  

  Catálogo de Produto: OMP400 apalpador óptico para máquinas

  No description available

  [510kB]
• Catálogo de Produto: OMP40-2 apalpador óptico para máquinas [pt]
  

  Catálogo de Produto: OMP40-2 apalpador óptico para máquinas

  No description available

  [580kB]
• Catálogo de Produto: Apalpador óptico para máquinas OMP600 [pt]
  

  Catálogo de Produto: Apalpador óptico para máquinas OMP600

  No description available

  [555kB]
• Catálogo de Produto: OMP60 - apalpador óptico para máquinas [pt]
  

  Catálogo de Produto: OMP60 - apalpador óptico para máquinas

  No description available

  [543kB]
• Data sheet: OMI optical machine interface
  

  Data sheet: OMI optical machine interface

  The OMI is an optical transmitter/receiver/interface, which conveys and processes signals between an inspection probe and the CNC machine control The OMI is an alternative to the OMM receiver + MI 12 interface arrangement. H-2000-2285-02-B

  [292kB]
• Data sheet: Optical modular probes
  

  Data sheet: Optical modular probes

  OMP40M is a special modular version of the OMP40-2

  [235kB]
• Data sheet: OSI with OMM-2 multiple optical probe interface system
  

  Data sheet: OSI with OMM-2 multiple optical probe interface system

  The OSI with OMM-2 is a multiple optical probe interface system. The OSI is designed to be installed within the CNC machine controller’s cabinet and be used with either a single or tandem OMM-2 configuration, housed within the machine’s working envelope.

  [3.3MB]
• Data sheet: OTS
  

  Data sheet: OTS

  The cableless OTS with optical signal transmission allows unrestricted machine motion and ease of installation on CNC machining centres.

  [749kB]
• Data sheet: OTS 1/2 AA
  

  Data sheet: OTS 1/2 AA

  No description available

  [336kB]
• Data sheet: OTS AA
  

  Data sheet: OTS AA

  The cableless OTS with optical signal transmission allows unrestricted machine motion and ease of installation on CNC machining centres.

  [449kB]
• Data sheet: Parallel shanks for lathe probes
  

  Data sheet: Parallel shanks for lathe probes

  Shanks for OLP40 / OMP40M / RLP40 / RMP40M

  [62kB]
• Data sheet: LTS (length tool setter)
  

  Data sheet: LTS (length tool setter)

  Principal application: Tool length setting, broken tool detection and thermal compensation on all sizes of CNC machines.

  [470kB]
• Data sheet: Primo™ system
  

  Data sheet: Primo™ system

  Workpiece set-up and tool setting on small to medium CNC machining centres.

  [545kB]
• Catálogo de Produto: Software de apalpador para máquinas-ferramenta Productivity+™ Active Editor Pro [en]
  

  Catálogo de Produto: Software de apalpador para máquinas-ferramenta Productivity+™ Active Editor Pro

  No description available

  [1.1MB]
• Data sheet: Productivity+™ CNC plug-in
  

  Data sheet: Productivity+™ CNC plug-in

  The Productivity+™ CNC plug-in is a unique software application for CNC machine tools, offering unparalleled opportunities for workpiece measurement, inspection and on-machine process control. Providing significantly enhanced data handling capacity and analytical capability in comparison with traditional software offerings, the application is a core component of the Renishaw SPRINT™ scanning probe system.

  [851kB]
• Data sheet: Probe software for machine tools : programs and features
  

  Data sheet: Probe software for machine tools : programs and features

  H-2000-2298 - Overview of the available range of macro software packages.

  [4.4MB]
• Data sheet: PSU3 power supply unit
  

  Data sheet: PSU3 power supply unit

  The PSU3 provides a +24V dc power supply for Renishaw signal transmission units, when a +24V dc power supply is not available from the CNC machine control.

  [54kB]
• Data sheet: Radio modular probes
  

  Data sheet: Radio modular probes

  Radio modular probes

  [227kB]
• Data sheet: Renishaw CNC Reporter
  

  Data sheet: Renishaw CNC Reporter

  Renishaw CNC Reporter is a PC-based statistical analysis package designed to import, interrogate and analyse measurement and inspection data obtained using Renishaw machine tool probing software.

  [634kB]
• Data sheet: Renishaw GUI for Okuma machine tools
  

  Data sheet: Renishaw GUI for Okuma machine tools

  The Renishaw graphical user interfaces (GUIs) provide an intuitive, user-friendly programming environment that guides users through the process of generating machine code. Eliminating the difficulty associated with traditional machine tool programming techniques, use of the GUI allows cycles to be produced and selected with minimal user input.

  [213kB]
• Catálogo de Produto: Apalpador a rádio para [pt]
  

  Catálogo de Produto: Apalpador a rádio para

  Not applicable

  [219kB]
• Catálogo de Produto: Interface a rádio RMI-Q [pt]
  

  Catálogo de Produto: Interface a rádio RMI-Q

  No description available

  [389kB]
• Data sheet: RMI radio machine interface
  

  Data sheet: RMI radio machine interface

  The RMI is a radio transceiver, which conveys and processes signals between an inspection probe and the CNC machine control.

  [382kB]
• Catálogo de Produto: RMP40 – apalpador a rádio [pt]
  

  Catálogo de Produto: RMP40 – apalpador a rádio

  No description available

  [165kB]
• Catálogo de Produto: RMP60 - apalpador por rádio para máquinas [pt]
  

  Catálogo de Produto: RMP60 - apalpador por rádio para máquinas

  No description available

  [182kB]
• Catálogo de Produto: RMP60 - apalpador por rádio para máquinas [pt]
  

  Catálogo de Produto: RMP60 - apalpador por rádio para máquinas

  No description available

  [182kB]
• Catálogo de Produto: RMP60 - apalpador por rádio para máquinas [pt]
  

  Catálogo de Produto: RMP60 - apalpador por rádio para máquinas

  No description available

  [182kB]
• Data sheet: RMP60 radio machine probe
  

  Data sheet: RMP60 radio machine probe

  RMP60 probe system with radio signal transmission. When switched on, the probe transmits in all directions for ease of operation on vertical, horizontal CNC machining centres and vertical turret lathes

  [395kB]
• Catálogo de Produto: RMP600 - apalpador a rádio para máquinas [pt]
  

  Catálogo de Produto: RMP600 - apalpador a rádio para máquinas

  Inspeção de peças e preparação de trabalho em máquinas multitarefas, centros de usinagem e centros de usinagem tipo portal.

  [185kB]
• Data sheet: RP1 and RP2 toolsetting / inspection probes
  

  Data sheet: RP1 and RP2 toolsetting / inspection probes

  The RP1 and RP2 probes are suitable for OEM installation into purpose built holders, or for use with Renishaw's automatic or manual toolsetting arms. H-2000-2025-02-A

  [130kB]
• Data sheet: RP3 tool setting probe
  

  Data sheet: RP3 tool setting probe

  RP3 tool setting/inspection probe data sheet.

  [284kB]
• Catálogo de Produto: RTS – Preset de ferramentas a rádio [pt]
  

  Catálogo de Produto: RTS – Preset de ferramentas a rádio

  No description available

  [273kB]
• Data sheet: Set and Inspect for Fanuc
  

  Data sheet: Set and Inspect for Fanuc

  Set and Inspect is a simple, intuitive, on-machine probing app for Fanuc customers who require an easy-to-use probing solution. The app is installed onto the Windows®-based CNC control or a Windows® tablet connected to the NC.

  [196kB]
• Data sheet: Set and Inspect for Kitamura
  

  Data sheet: Set and Inspect for Kitamura

  Set and Inspect is a simple, intuitive, on-machine probing app for Kitamura customers who require an easy-to-use probing solution. The app is installed onto the Windows®-based CNC control or a Windows® tablet connected to the NC.

  [143kB]
• Data sheet: Set and Inspect for Mazak
  

  Data sheet: Set and Inspect for Mazak

  Developed in conjunction with Mazak, Set and Inspect is a simple, intuitive, on-machine probing app for Mazak customers who require an easy-to-use probing solution. The app is installed onto the Windows®-based CNC control and uses the Mazak API to communicate and share real-time status information with the user.

  [195kB]
• Data sheet: Set and Inspect for Okuma
  

  Data sheet: Set and Inspect for Okuma

  Set and Inspect is a simple, intuitive, on-machine probing app for Okuma customers who require an easy-to-use probing solution. The app is installed onto the Windows®-based CNC control connected to the NC.

  [183kB]
• Data sheet: Shank modifications for machine tool probes
  

  Data sheet: Shank modifications for machine tool probes

  H-2000-2368-01-B Data sheet

  [43kB]
• Catálogo de Produto: OSP60 / OSI-S / OMM-S [pt]
  

  Catálogo de Produto: OSP60 / OSI-S / OMM-S

  Sistema de digitalização de alta velocidade para controle de processo na máquina.

  [1.0MB]
• Data sheet: Productivity+™ Scanning Suite controller requirements: Fanuc Series 3xi
  

  Data sheet: Productivity+™ Scanning Suite controller requirements: Fanuc Series 3xi

  Minimum recommended controller requirements for use of the Productivity+™ Scanning Suite on a machining centre with a Fanuc Series 3xi controller

  [653kB]
• Data sheet: Productivity+™ Scanning Suite controller requirements: Mori Seiki MAPPS (Fanuc Series 31i)
  

  Data sheet: Productivity+™ Scanning Suite controller requirements: Mori Seiki MAPPS (Fanuc Series 31i)

  Minimum recommended controller requirements for use of the Productivity+™ Scanning Suite on a Mori Seiki machining centre with MAPPS operating system and a Fanuc Series 31i control

  [1.1MB]
• Data sheet: Productivity+™ Scanning Suite controller requirements: Siemens 840D
  

  Data sheet: Productivity+™ Scanning Suite controller requirements: Siemens 840D

  Minimum controller requirements for use of the Productivity+™ Scanning Suite on a machining centre with a Siemens 840D controller

  [634kB]
• Data sheet: SSR Convertor for TS20 and HPA
  

  Data sheet: SSR Convertor for TS20 and HPA

  MTP|SSR Convertor

  [88kB]
• Data sheet: Taper shanks for machine tool probes
  

  Data sheet: Taper shanks for machine tool probes

  US version

  [88kB]
• Data sheet: Taper shanks for machine tool probes
  

  Data sheet: Taper shanks for machine tool probes

  US version

  [88kB]
• Data sheet: TRS1 non-contact broken tool detection system
  

  Data sheet: TRS1 non-contact broken tool detection system

  TRS1 laser-based non-contact broken tool detection system.

  [455kB]
• Data sheet: TRS2 non-contact tool breakage detection system
  

  Data sheet: TRS2 non-contact tool breakage detection system

  Tool recognition with ToolWise™ technology ensures reliable, high-speed, broken tool detection.

  [368kB]
• Data sheet: TS20 two axis tool setting probe for lathes
  

  Data sheet: TS20 two axis tool setting probe for lathes

  Data sheet: TS20 two axis tool setting probe for lathes

  [253kB]
• Data sheet: TS27R tool setting probe
  

  Data sheet: TS27R tool setting probe

  Data sheet for the TS27R Toolsetting Probe

  [258kB]
• Data sheet: TS34 tool setting probe
  

  Data sheet: TS34 tool setting probe

  Data sheet for the TS34 touch probe.

  [125kB]
• Data sheet: TSA Motorised tool setting arm
  

  Data sheet: TSA Motorised tool setting arm

  No description available

  [215kB]
• Leaflet: Styli recommendations for strain gauge probes
  

  Leaflet: Styli recommendations for strain gauge probes

  Renishaw recommends that carbon fibre styli be used with the MP700, OMP400, RMP600 and MP250 strain gauge probes. Styli made from carbon fibre are preferred as their lower mass is best suited for use with the sensitive strain gauge mechanisms used within these probes.

  [129kB]
• Data sheet: HPRA and TSI 2 / TSI 2-C removable arm and interface
  

  Data sheet: HPRA and TSI 2 / TSI 2-C removable arm and interface

  Tool measuring on 2-axis and 3-axis CNC lathes

  [447kB]
• Data sheet: NCi-6 non-contact tool setting
  

  Data sheet: NCi-6 non-contact tool setting

  The NCi-6 processes signals from the NC4 or NC4+ and converts them into a voltage-free solid state relay (SSR) output, which is transmitted to the CNC machine control.

  [226kB]
• Catálogo de Produto: Linha de presets de ferramentas sem contato NC4 [pt]
  

  Catálogo de Produto: Linha de presets de ferramentas sem contato NC4

  No description available

  [239kB]
• Data sheet: RMP400
  

  Data sheet: RMP400

  Workpiece inspection and job set-up on multi-tasking machines, machining centres and gantry machining centres.

  [291kB]
• Data sheet: OMM-2C optical machine module
  

  Data sheet: OMM-2C optical machine module

  No description available

  [452kB]