Skip navigation


Software requirements for installation

The required version of UCCsuite:

  • MCUlite-2 - UCCsuite 4.4 and greater
  • MCU5 - UCCsuite 4.0 and greater
  • MCU W - UCCsuite 4.4 and greater

PSU specification requirements for MCU W operation

Should a replacement PSU be required it is recommended that it be purchased from Renishaw, or it must meet the following specification:

  • Output +24 Vdc, 0.6 A
  • 2.5 mm dc jack connector (centre positive)
  • To comply with electrical safety legislation the supply negative must be connected to the earth of the ac input and is single fault tolerant and approved to EN 60950-1