Requirements

Software requirements for installation

The required version of UCCsuite:

  • MCU5-2 - UCCsuite 4.9 and later
  • MCU W-2 - UCCsuite 4.9 and later

PSU specification requirements for MCU W-2 operation

Should a replacement PSU be required it is recommended that it be purchased from Renishaw, or it must meet the following specification:

  • Output +24 Vdc, 0.6 A
  • 2.5 mm dc jack connector (centre positive)
  • To comply with electrical safety legislation the supply negative must be connected to the earth of the ac input, must be single fault tolerant and approved to EN 60950-1