Skip navigation

SCP80 / SCP80V stylus change port

Stylus change port for use with SP80 stylus holders

  • SCP80Used for automatic changing between stylus holders
  • SCP80 is for use with the SP80 probe and is mounted to the modular rack system (MRS)
  • SCP80V is for use with the SP80H probe and is for a vertically mounted rack (not supplied by Renishaw) - it provides a a higher force for the return forks when in a vertical orientation
  • The SCP80V can also be used with SP80 when using long styli that extend through the rear of the port, to ensure that the port returns to its home position

SCP80V

  • SCP80V is for use with the SP80H probe and is for a vertically mounted rack (not supplied by Renishaw). It provides a a higher force for the return forks when in a vertical orientation
  • The SCP80V can also be used with SP80 when using long styli that extend through the rear of the port, to ensure that the port returns to its home position
  • No electrical connections required and fits into any standard extrusion
  • Has a spring-loaded mechanism that is designed to ease the stylus holder away from the probe body to reduce the pull-off force to less than 20 N during the change cycle

SCP80V mounted on an OEM's mounting system for use with SP80H


1

OEM's mounting system

2

SCP80V

3

SP80H


Due to the different spring mechanism, the SCP80V should be used with SP80 to allow styli to point to the rear of the port when mounted horizontally on the MRS / MRS2 rail.

SCP80V horizontally mounted to hold styli that are orientated to the rear of the rack port

Dimensions

SCP80 dimensions

Specification


Type of rack

Passive, individual port for interchanging SH80

Mounting

Mounts to the MRS / MRS2 modular rack system

Spaced and user definable positions along the length of the MRS / MRS2

Labels

User applied port number labels

Collision protection

No collision protection in the SCP80 or MRS / MRS2

Operating orientation

Mounted parallel to the CMM bed

Maximum stylus length

The MRS can be configured to accommodate an SH80 with the 500 mm maximum (vertical) stylus length

Additional MRS legs may be required

Port entry tolerances

CMM positional accuracy of ±0.25 mm

Port lid opening force

2.6 N

Force to detach SH80

<20 N


  • User guide:  SP80 and SP80HUser guide: SP80 and SP80H
  • Installation guide:  SP80 and SP80HInstallation guide: SP80 and SP80H
  • Leaflet:  User's leaflet: MRS heavy duty legsLeaflet: User's leaflet: MRS heavy duty legs

Part number

SP80 scanning probe kits

SP80 kit 1 including 1 SH80, 1 × KM80, 1 × SH80K and 1 × SH80 removal tool

A-2238-0700

SP80 kit 2 including 1 × SH80, 1 × KM80, 1 × SH80K, 1 × SH80 removal tool, 3 × SCP80 and 1 × 600 mm MRS kit

A-2238-0732

SP80 kit 3 including 1 × SH80, 1 × KM80,1 × SH80K, 1 × SH80 removal tool, 4 × SCP80 and 1 × 600 mm MRS kit

A-2238-0733

SP80 kit 4 including 1 × SH80, 1 × KM80, 1 × SH80K, 1 × SH80 removal tool, 5 × SCP80 and 1 × 1000 mm MRS kit

A-2238-0734

SP80 kit 5 including 3 × SH80, 1 × KM80,1 × SH80K, 1 × SH80 removal tool, 3 × SCP80 and 1 × 600 mm MRS kit

A-2238-0735

SP80 kit 6 including 4 × SH80, 1 × KM80, 1 × SH80K, 1 × SH80 removal tool, 4 × SCP80 and 1 × 600 mm MRS kit

A-2238-0736

SP80 kit 7 including 5 × SH80, 1 × KM80, 1 × SH80K, 1 × SH80 removal tool, 5 × SCP80 and 1 × 1000 mm MRS kit

A-2238-0737

SP80H scanning probe kits

SP80H kit 1 including 1 SH80, 1 × KM80, 1 × SH80K and 1 × SH80 removal tool

A-2238-0419

SP80 and SP80H stylus changing accessories

SCP80 stylus change port for SP80 (for use with MRS / MRS2 system)

A-2238-0706

SCP80V stylus change port for SP80 and SP80H

A-2238-0726

SH80 stylus holder for SP80 and SP80H

A-2238-0705

SH80K kinematic stylus holder for SP80 and SP80H

A-2238-0430

SH80 removal tool for SP80 and SP80H

M-2238-0443

SP80 and SP80H interfaces and counter cards

IU80 interpolator unit for SP80 and SP80H

A-2238-0720

CC6 counter card for SP80 and SP80H (includes PL158 cable)

A-4068-0400

SP80 accessories

SM80 shank mount plate for SP80 and SP80H

A-2238-0704

KM80 standard kinematic mount for SP80 and SP80H

A-2238-0703

KM6080 60 mm to 80 mm quill adaptor for SP80 and SP80H

A-2238-0020

PHA80 - SP80 to KM1 quick change adaptor

A-2238-0752