Skip navigation

Power supply

Powering the PHC10-3 PLUS

The PHC10-3 PLUS controller is rated to operate at +24 Vdc, 1 A max input current. It should be connected via Ø5.5 mm dc jack plug to the provided 24 Vdc 40 W power supply. If an internal interface is fitted with the PHC10-3 PLUS it will obtain its power internally from the PHC10-3 PLUS controller.

An equipment bonding point is provided on the rear panel for connection to the rest of the installation. The PHC10-3 PLUS does not require a protective earth.