Skip navigation

Manually mounting / removing the stylus holders from REVO probes

To manually mount or remove the stylus holder from the REVO probe you need to:

  1. Align the front sides of the probe with the stylus (look at the "Renishaw" engraving on the side of probe or alignment marks as applicable).
  2. Carefully align the stylus holder and the probe, allowing the magnetic attraction to gently connect the kinematic joints.
  3. Gently rotate the stylus holder to ensure correct location.
  4. To remove, securely hold the stylus holder, gently tilt the stylus holder to break the kinematic joints.

Attaching the REVO stylus holder to the REVO probe