校正應用要點

瀏覽 Renishaw 雷射量測及循圓測試儀產品的一系列應用要點。

XM-60 應用要點

Application note: XM-60 wireless communications security protocol [en]

Application note: XM-60 wireless communications security protocol

Support document on request when the customer is concerned about data security.
[127kB]
Application note: Manual sign convention using XM systems [en]

Application note: Manual sign convention using XM systems

This document explains the process of defining the sign convention when there are fewer than three axes with controlled motion whilst performing an XM system measurement.
[730kB]
Application note: XM-60 and XM-600 multi-axis calibrator spares list [en]

Application note: XM-60 and XM-600 multi-axis calibrator spares list

This application note lists the available spares for the XM-60 and XM-600 multi-axis calibrator.
[359kB]

XK10 應用要點

應用要點： XK10 平行度的詳述

應用要點： XK10 平行度的詳述

XK10 可量測平行度和平行真直度。本文旨在說明工具機組裝時的平行度和平行真直度間的差異及校準，以及執行這些量測的傳統方法。
[609kB]
應用要點： XK10 垂直度的詳述

應用要點： XK10 垂直度的詳述

XK10 校準雷射系統可量測機器的兩個標稱垂直軸之間的垂直度偏移量。本文旨在說明使用傳統方法及使用 XK10 系統在量測垂直度方面的差異。
[1.2MB]
Application note: XK10 alignment laser spares list [en]

Application note: XK10 alignment laser spares list

This application note lists the key system components for the XK10 alignment laser.
[484kB]

XL-80 應用要點

Application note: Adjustment of tripod column for XL-80 laser systems [en]

Application note: Adjustment of tripod column for XL-80 laser systems

This application note explains adjustments to reduce column rotation that may occur when extending or retracting the main column of the universal tripod.
[857kB]
Application note: Effect of environmental compensation errors on measurement accuracy [en]

Application note: Effect of environmental compensation errors on measurement accuracy

This application note describes the accuracy of measurements taken with a laser interferometer system depends upon the environmental and machine conditions of the system under test.
[97kB]
Application note: Straightness and squareness optical set-ups using fixed turning mirror and LS350 beam steerer [en]

Application note: Straightness and squareness optical set-ups using fixed turning mirror and LS350 beam steerer

This application note describes when performing certain straightness and squareness measurements how it is now possible to use a combination of beam steerer and fixed turning mirror instead of an adjustable turning mirror.
[1.1MB]
Application note: XL-80 ±0.5ppm uncertainty breakdown [en]

Application note: XL-80 ±0.5ppm uncertainty breakdown

This application note provides a breakdown of the XL-80 uncertainty (accuracy) and provides clarity on the error budget which the system components meet.
[126kB]
Application note: XL-80 laser system spares list [en]

Application note: XL-80 laser system spares list

This application note lists the key system components for the XL-80 laser system.
[2.0MB]

XR20 應用要點

Application note: Bluetooth troubleshooting for QC20-W ballbar and XR20-W rotary axis calibrator [en]

Application note: Bluetooth troubleshooting for QC20-W ballbar and XR20-W rotary axis calibrator

This application note contains Q and As related to Bluetooth communications with QC20-W ballbar and XR20-W rotary axis calibrator
[113kB]
Application note: How robust is XR20-W? [en]

Application note: How robust is XR20-W?

This application note describes the tests carried out to ensure the XR20-W remains operational after factors it would experience through transportation, set up and use.
[712kB]
Application note: Principles of XR20-W measurement [en]

Application note: Principles of XR20-W measurement

This application note describes how the XR20-W system allows the measurement of rotary axes angular positioning. The true angular position of the axis is calculated from a combination of the rotational position recorded by the XR20-W's internal encoder and measurements from a laser and angular optic mounted on the XR20-W axis.
[331kB]
Application note: System comparison RX10 vs XR20-W [en]

Application note: System comparison RX10 vs XR20-W

This application note compares the weight, dimensions, performance, features and compatibility of the RX10 and XR20-W rotary axis calibrators.
[206kB]
Application note: What is the role of the laser when using XR20-W? [en]

Application note: What is the role of the laser when using XR20-W?

This application note describes the multiple roles of the laser when used with an XR20-W rotary axis calibrator.
[245kB]
Application note: XR20 rotary axis calibrator spares list [en]

Application note: XR20 rotary axis calibrator spares list

This support article lists the available spares for the XR20 rotary axis calibrator.
[344kB]

QC20 應用要點

應用要點：程式執行 QC20 循圓測試儀空間測試

應用要點：程式執行 QC20 循圓測試儀空間測試

本應用說明介紹了創建單一工件程式的方法。使用單一工件程式，使用者在執行三個平面測試時，無需中途取下 QC20 循圓測試儀，也無需在不同測試平面間切換機台程式，進而進一步縮短了測試時間。
[279kB]
應用要點：墊高塊：用於部分弧線刀具路徑測試

應用要點：墊高塊：用於部分弧線刀具路徑測試

使用長度不超過 150 mm 的 QC20 循圓測試儀執行部分弧線測試時，無需使用額外元件。但是，對於半徑更大的測試，則須在中心座下方使用墊高塊，以防止循圓測試儀與工具機工作台發生碰撞。
[186kB]
Application note: How to check QC20 ballbar Bluetooth compatibility [en]

Application note: How to check QC20 ballbar Bluetooth compatibility

The QC20 ballbar communicates with a PC using Bluetooth Low Energy (LE) wireless technology. This can be achieved by using a PC with built-in Bluetooth capability or by using a USB Bluetooth dongle.
[166kB]
應用要點： QC20-W 用 Bluetooth® 簡介 [en]

應用要點： QC20-W 用 Bluetooth® 簡介

No description available
[85kB]
Application note: Bluetooth troubleshooting for QC20-W ballbar and XR20-W rotary axis calibrator [en]

Application note: Bluetooth troubleshooting for QC20-W ballbar and XR20-W rotary axis calibrator

This application note contains Q and As related to Bluetooth communications with QC20-W ballbar and XR20-W rotary axis calibrator
[113kB]
Application note: Comparison of partial arc and 360° tests [en]

Application note: Comparison of partial arc and 360° tests

This application note describes how partial arc testing can be performed to save both test time and axis travel. So how do the results compare between a partial arc test and a full 360° test performed in the same part of the machine volume?
[279kB]
Application note: Comparison of Ballbar 5 and Ballbar 20 analysis [en]

Application note: Comparison of Ballbar 5 and Ballbar 20 analysis

This application note describes the differences between a typical example of a 360° test analysed with Ballbar 5 and Ballbar 20.
[248kB]
Application note: QC20 spares list [en]

Application note: QC20 spares list

This support article lists the available spares for the QC20 wireless ballbar.
[338kB]
Application note: QC20-W COM port profile for Windows 7 [en]

Application note: QC20-W COM port profile for Windows 7

The application note explains how to configure Ballbar 20 software to connect to QC20-W ballbar via a Bluetooth device set up as a COM port (Windows 7).
[924kB]
Application note: QC20-W COM port profile for Windows 8 [en]

Application note: QC20-W COM port profile for Windows 8

The application note explains how to configure Ballbar 20 software to connect to QC20-W ballbar via a Bluetooth device set up as a COM port (Windows 8).
[1.1MB]
Application note: 'Unhandled exception' during file selection for volumetric analysis [en]

Application note: 'Unhandled exception' during file selection for volumetric analysis

This application note explains the background and solution to Ballbar 20 giving an 'Unhandled exception' when opening multiple results files for volumetric analysis.
[174kB]
Application note: Errors diagnosed using partial arc analysis [en]

Application note: Errors diagnosed using partial arc analysis

This application note describes how partial arc analysis allows quicker, single set-up ballbar checks to be performed. The Renishaw analysis is able to diagnose most of the machine errors identified using 360° tests.
[163kB]
Application note: Ballbar Trace Bluetooth connection fix [en]

Application note: Ballbar Trace Bluetooth connection fix

This application note explains the procedure to clear the previous device from the Ballbar Trace history to enable connection to a new device.
[163kB]
應用要點：使用 QC20 循圓測試儀執行 ISO 10791-6 標準測試

應用要點：使用 QC20 循圓測試儀執行 ISO 10791-6 標準測試

本文詳細介紹了根據 ISO 10791-6 標準，使用 Renishaw QC20 循圓測試儀、相關軟體及硬體採集資料的解決方案。
[1.0MB]

服務和支援

Renishaw 為客戶服務與支援所投入的努力，贏得了備受肯定的聲譽。如果您需要技術諮詢，可以在技術支援資料庫輕鬆取得各種指南及下載，此外也可以聯繫我們的全球支援團隊。

現在就聯繫我們的銷售團隊

請與 Renishaw 聯絡以取得更多資訊及與專家交流。