Navigation
Power supply
Powering the PI 200-3
The PI 200-3 is rated to operate at +24 Vdc, 0.25 A max input current. It should be connected via the Ø5.5 × 2.5mm barrel jack dc provided with the provided 24 Vdc 40 W power supply.
PI 200-3 does not require a protective earth, however, an equipotential bonding point is provided on the rear panel for connection to the rest of the installation.
If an internal interface is fitted with the PHC10-3 PLUS, it will obtain its power internally from the PHC10-3 controller.