Skip navigation


SCR200 stylus changing rack

  • SCR200 stylus changing rackRapid automatic changing of stylus modules without the need to requalify stylus tips
  • Powered by PI 200-3
  • Incorporates features to facilitate safe stylus changing


SCR200 stylus changing rack dimensioned



0.75 kg

Mounting orientation

Vertical or horizontal

Mounting fixture

Single stud (M8, M10)

Number of ports


Repeatability of stylus change (2σ) at 50 mm

Automatic ≤1 μm
Manual ≤2 μm

Entry speed


Module pull-off force

800 g maximum

Overtravel protection

Electromechanical (5° minimum deflection)

LED indicators




Red (flashing during probe inhibit)

Change cycle detection

Optoelectronic beam system with Hall effect proximity sensor

Multi-rack usage

Up to two SCR200 units (12 ports) may be connected with a special cable


All alignment requirements and port docking co-ordinates can be established with only eight probing points. No control signals from the CMM are required.

Alignment adjustment

XY rotational only ±0.1 mm

Docking tolerance

X ±0.17, Y ±1.5 mm, Z ± 2 mm

Power supply / control

PI 200-3 interface

Cable length

20 m maximum (PI 200-3 to SCR2000)

Cable connection

6-pin miniature DIN socket

Set-up time

<30 minutes

Installation and user's guides

Part number
TP200 probe
TP200 body / sensor onlyA-1207-0020
TP200 probe kits
TP200 kit 1 (including standard force stylus module)A-1207-0001
TP200 kit 2 (including low force stylus module)A-1207-0002
TP200B probe kits
TP200B kit 1 (including standard force stylus module)A-1207-0055
TP200 stylus modules
TP200 standard force stylus moduleA-1207-0010
TP200 low force stylus moduleA-1207-0011
TP200 EO (extended overtravel) stylus moduleA-1207-0012
TP200 probe interface
PI 200-3 probe interface for TP1, TP2, TP6, TP20 and TP200A-5707-0100
PI 200-3 card for use with PHC10-3 PLUSA-5707-0200
SCR200 stylus changing rack
SCR200 rack for automatic stylus changing with TP200 (rack only)A-1207-0031
SCR200 active six port change rack for use with TP200 (including 3 x standard force stylus modules)A-1207-0030
SCR200 active six port change rack for use with TP200 (including 3 x low force stylus modules)A-1207-0070
TP200 accessories
24 V PSU for PHC10-3 PLUS, PI 200-3 and PI 7-3P-EA02-0042
M12 location pieceM-1371-0298