Skip navigation

Renishaw GUIs

Graphical user interfaces for part setting, inspection, tool setting and machine tool diagnostics.

Wide range of commonly used probing cycles.

Easy-to-use graphical interface.

Provides feedback and updates parameters.

About Renishaw GUIs

Renishaw has worked with a number of machine tool builders to produce graphical user interface (GUI) software for applications such as part setting, inspection, tool setting and probe calibration.

Each GUI provides an intuitive, user-friendly environment designed to guide users through the process of using a Renishaw machine tool probe. The applications eliminate the difficulty associated with traditional machine tool programming, allowing cycles to be used with minimal user input.

GUIs are available for Fanuc, Okuma, Mazak, Siemens, Heidenhain and Bosch Rexroth-based machine tool controls.

Features and benefits

Offering significant ease of use, the GUIs guide users through probe calibration, part setting, tool setting and probe inspection cycles, increasing usability and eliminating manual set‑up tasks. Simply position the probe above the desired feature and select the relevant cycle to run the desired measurement routine.

In addition to simplifying standard probing tasks, Renishaw GUIs provide additional functionality including:

Set and Inspect

Set and Inspect is a new on-machine probing app for use on a Microsoft® Windows®-based control – or on a Windows tablet connected to the control via Ethernet. Support is provided for Fanuc, Mazak, Okuma, Mitsubishi and Kitamura controls.